The Case IH JX1075N tractor engine horsepower is 75 hp | 55.9 kW, and PTO horsepower is 62 hp | 46.2 kW.
Case IH JX1075N Horsepower Specs
| Engine gross horsepower | 75 hp | 55.9 kW |
|---|---|
| PTO horsepower claimed | 62 hp | 46.2 kW |
Case IH JX1075N Useful Horsepower Calculations
| PTO-to-engine power transfer | 82.7% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 2.9 ci per PTO hp |
| PTO horsepower per liter | 21.4 PTO hp per L |
| Engine size per engine horsepower | 2.4 ci per engine hp |
| Engine horsepower per liter | 25.9 engine hp per L |
| Torque per PTO horsepower | 3.6 lb-ft per PTO hp |
| Rated speed per PTO horsepower | 37.1 rpm per PTO hp |
Case IH JX1075N Engine Specs
| Engine type | turbocharged diesel |
|---|---|
| Displacement | 179 ci | 2.9 L |
| Bore and stroke | 3.88×5.06 inches | 99 x 129 mm |
| Rated RPM | 2300 |
| Torque | 221 lb-ft | 299.7 Nm |
| Torque RPM | 1400 |
Case IH JX1075N Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Case IH JX1075N Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH JX1075N Horsepower FAQ
How much horsepower does the Case IH JX1075N have?
The listed engine output is 75 hp, close to the 80 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 75 hp as the main engine number.
How much PTO horsepower does the Case IH JX1075N have?
The listed PTO output is 62 hp, close to the 65 hp benchmark average. Use 62 PTO hp as the practical implement-sizing number.
How much engine power reaches the PTO on the Case IH JX1075N?
The PTO-to-engine transfer works out to 82.7%, from 75 engine hp to 62 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH JX1075N engine?
The engine displacement is 179 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH JX1075N engine stressed for its PTO horsepower?
The engine has about 2.9 cubic inches per PTO hp, using 179 ci and 62 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH JX1075N make?
The output density is about 21.4 PTO hp per liter, using 62 PTO hp and 2.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Case IH JX1075N have?
The listed torque is 221 lb-ft, close to the 240 lb-ft benchmark average. The 221 lb-ft figure is a normal torque result for this class.
Does the Case IH JX1075N have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.6 lb-ft per PTO hp, using 221 lb-ft and 62 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Case IH JX1075N rated at?
The rated speed is 2,300 rpm, close to the 2,200 rpm benchmark average. The 2,300 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
