Case IH JX1060C Specifications

The Case IH JX1060C specifications include engine power rated at 57 hp (42.5 kW), transmission options including mechanical shuttle or power shuttle and a listed weight of 6,065 to 6,590 lbs.

Case IH JX1060C key specifications

Engine power 57 hp (42.5 kW)
PTO power 45 hp (33.6 kW)
Displacement 178.8 cu in (2.9 L)
Transmission mechanical shuttle or power shuttle
Fuel capacity 19.5 gal (73.8 L)
Weight 6,065 to 6,590 lbs
Rear PTO independent

Case IH JX1060C industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power57 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power45 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity19.5 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight6,590 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average

Case IH JX1060C power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power57 hp
PTO power45 hp
Tested PTO power48.3 hp
Tested drawbar power38.4 hp

Case IH JX1060C dimensions chart

Compare the main listed tractor dimensions using centimetres.

Width176 cm
Cab height232 cm
ROPS height242 cm

Engine specifications

Bore/Stroke 4.094 × 4.528 inches (104 × 115 mm)
Rated RPM 2,300
Compression 18.0:1
Fuel system direct injection
Air cleaner dual paper elements
Pre-heating thermostart
Starter volts 12

Transmission options

Gears 16 forward and reverse

PTO and hitch

Drawbar (tested) 38.4 hp (28.6 kW)
PTO (tested) 48.3 hp (36.0 kW)
Rear hitch category Category II
Hitch control mechanical lower-link draft sensing.
Rear lift 3,960 lbs (1,796 kg)
Rear PTO speed 540 rpm, 1.375-inch shaft

Hydraulics

Hydraulic type open center
Hydraulic pressure 2,755 psi (190.0 bar)
Valves 1 to 4
Pump flow 12.4 gpm (46.9 L/min)
Steering flow 7.4 gpm (28.0 L/min)

Mechanical specifications

Clutch mechanical dry disc

Electrical specifications

Electrical ground negative
Charging system alternator
ROPS charging amps 65
Cab charging amps 85
Battery CCA 730
Battery volts 12

Dimensions and weight

Width 69.6 inches (176 cm, minimum)
Operating weight 6,065 lbs (2,751 kg, 2WD)
Ballasted weight 7,670 lbs (3,479 kg)
ROPS height 95.6 inches (242 cm)
Cab height 91.5 inches (232 cm)

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.