The Zetor 11050 specifications include engine power rated at 107 hp (79.8 kW), a two-speed power shift or three-speed power shift transmission, and a listed weight of 8,600 to 9,030 lbs.
Zetor 11050 key specifications
| Engine power | 107 hp (79.8 kW) |
|---|---|
| PTO power | 94 hp (70.1 kW) |
| Displacement | 254 cu in (4.2 L) |
| Transmission | two-speed power shift or three-speed power shift |
| Weight | 8,600 to 9,030 lbs |
| Rear PTO speed | 540 or 1,000 rpm, 1.375-inch shaft |
Zetor 11050 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power107 hp
Low 10 hpAverage 48.1 hpHigh 180 hp
PTO power94 hp
Low 10.8 hpAverage 48.8 hpHigh 139 hp
Displacement4.2 L
Low 0.4 LAverage 2.6 LHigh 7.3 L
Fuel capacity48 gal
Low 2.4 galAverage 19.9 galHigh 79.3 gal
Maximum listed weight9,030 lbs
Low 1,090 lbsAverage 5,021.9 lbsHigh 12,875 lbs
This model Industry average
Zetor 11050 power chart
Compare the available engine, PTO and drawbar power ratings.
Zetor 11050 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke | 4.13 × 4.72 inches (105 × 120 mm) |
|---|---|
| Rated RPM | 2,200 |
| Starter | electric |
| Starter volts | 12 |
| Net engine power | 101 hp (75.3 kW) |
Transmission options
| Gear options | 16 forward and reverse or 24 forward and reverse |
|---|---|
| Clutch | 304.8 mm hydraulic cerametallic disc or wet disc |
PTO and hitch
| Rear hitch category | Category I/II |
|---|---|
| Hitch control | position and draft control |
| Rear lift (at ends) | 7,600 lbs (3,447 kg) |
| Rear PTO | independent |
Hydraulics
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2,900 psi (200.0 bar) |
| Valves | 3 |
| SCV flow | 14 gpm (53.0 L/min) |
| Total flow | 20 gpm (75.7 L/min) |
| Steering flow | 6 gpm (22.7 L/min) |
Capacities
| Mech shuttle Fuel tank | 40 gal (151.4 L) |
|---|---|
| Power shuttle Fuel tank | 48 gal (181.7 L) |
Mechanical specifications
| Differential lock | mechanical rear |
|---|
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 95 |
| Charging volts | 12 |
| Battery CCA | 950 |
| Battery volts | 12 |
Dimensions and weight
| Width | 78 inches (198 cm, minimum) |
|---|---|
| Ground clearance | 18 inches (45 cm) |
| Mech shuttle Wheelbase | 92 inches (233 cm) |
| Power shuttle Wheelbase | 96 inches (243 cm) |
| Mech shuttle Length | 153 inches (388 cm) |
| Power shuttle Length | 157 inches (398 cm) |
| Cab height | 106 inches (269 cm) |
| Mech shuttle Weight | 8,600 lbs (3,900 kg) |
| Power shuttle Weight | 9,030 lbs (4,096 kg) |
Tires and tread
| Front tread | 59 to 77 inches (149 to 195 cm) |
|---|---|
| Rear tread | 59 to 71 inches (149 to 180 cm) |
| Standard tires (ag) | Front: 13.6R24. Rear: 18.4R34 |
Attachments
| Raise time | 4.5s or 5s |
|---|---|
| dump | 4.5s or 3.5s |
| Rollback time | 3s or 3.5s |
| Attachment weight | 2,150 lbs (975 kg) or 2,750 lbs (1,247 kg) |
| Bucket width | 73 inches (185 cm) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Zetor website or the tractor’s operator manual.
