The Case IH Farmall 65A dimensions found are: length is 137.2 inches | 348 cm, width is 78.4 inches | 199 cm, and height is 96.9 inches | 246 cm.
Length137.2 inches | 348 cm
Width78.4 inches | 199 cm
Height96.9 inches | 246 cm
Case IH Farmall 65A Dimensions
Overall length
2WD: 137.2 inches | 348 cm | 4WD: 139.6 inches | 354 cm
Overall width
78.4 inches | 199 cm
Overall height
96.9 inches | 246 cm
Case IH Farmall 65A Weight
Shipping weight
5,059 lbs | 2294 kg | 5,688 lbs | 2580 kg
Case IH Farmall 65A Dimension Comparison Charts
Length comparison
This model
137.2 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
78.4 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
96.9 in
Average
100 in
Low
86 in
High
120 in
Weight comparison
This model
5,059 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
75 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall 65A Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH Farmall 65A is about 137.2 inches | 348 cm long, about 78.4 inches | 199 cm wide, and about 96.9 inches | 246 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall 65A Dimensions FAQ
Is the Case IH Farmall 65A a long tractor?
The Case IH Farmall 65A has an average listed length at 137.2 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall 65A narrow enough for tight storage?
The listed width is middle-of-the-pack at 78.4 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH Farmall 65A tall for a shed or garage?
The listed height is about normal at 96.9 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH Farmall 65A need?
The bare footprint is about 75 sq ft from a 11.4 ft length and 6.5 ft width. That is close to the 75 sq ft benchmark for this category.
Is the Case IH Farmall 65A heavy for its size?
The listed weight is average for the category at 5,059 lbs, which is close to the 5,500 lbs benchmark average. It sits near the normal benchmark before ballast, loader weight or implements are added.
Will the Case IH Farmall 65A fit easily in storage?
The fit numbers are fairly normal for the category: length 137.2 in, width 78.4 in and height 96.9 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
