The Case IH 2294 tractor hydraulic capacity is 25 gal | 94.6 L, pump flow is 23 gpm | 87.1 lpm, and hydraulic pressure is 2250 psi | 155.1 bar.
Hydraulic Capacity25 gal | 94.6 L
Hydraulic Flow23 gpm | 87.1 lpm
Pressure2250 psi | 155.1 bar
Hydraulic Typeclosed center
Valves / Remotes2 to 4 * 3 only with 4WD
Lift Capacity6600 lbs | 2993 kg
Case IH 2294 Hydraulic Capacity & Flow Specs
Hydraulic type
closed center
Hydraulic capacity
25 gal | 94.6 L
Hydraulic pressure
2250 psi | 155.1 bar
Pump flow
23 gpm | 87.1 lpm
Steering flow
8 gpm | 30.3 lpm
Hydraulic valves
2 to 4 * 3 only with 4WD
Case IH 2294 Hitch, Remote & Lift Specs
Rear hitch type
II
Rear lift at 24 inches
6600 lbs | 2993 kg
Case IH 2294 Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
0.9 gpm per gal
Hydraulic tank turnover estimate
about 1.1 minutes at rated pump flow
Steering flow vs pump flow
34.8% of listed pump flow
Rear lift per pump gpm
287 lb per gpm
Rear lift per hydraulic gallon
264 lb per gal
Estimated hydraulic horsepower
about 30.2 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
94.6 L capacity with 23 gpm pump flow
Case IH 2294 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
25 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
23 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,250 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
6,600 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH 2294 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
hydraulic wet disc brakes
Case IH 2294 Hydraulic Capacity FAQ
Is the Case IH 2294 hydraulic capacity big or small for its size?
The Case IH 2294 lists 25 gal | 94.6 L of hydraulic capacity, above the 18 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the Case IH 2294 hydraulics feel fast or slow?
The useful speed clue is 23 gpm | 87.1 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH 2294 hydraulic pressure tell you?
The pressure spec is 2250 psi | 155.1 bar, below the 2,600 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Case IH 2294?
On the Case IH 2294, 23 gpm | 87.1 lpm pump flow points to quicker loader and cylinder movement, 2,250 psi pressure affects force more than speed, and 6,600 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH 2294?
For implement matching, the useful checks are 23 gpm flow, 2,250 psi pressure, 6,600 lb listed lift, and 2 to 4 * 3 only with 4WD remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, not a brute-force hydraulic setup compared with higher-pressure systems, and has more oil volume in reserve for heat control and continuous hydraulic work, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH 2294 rear lift capacity strong?
The listed lift figure is 6600 lbs | 2993 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH 2294 hydraulic remotes enough?
The Case IH 2294 remote/valve listing is 2 to 4 * 3 only with 4WD. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH 2294 hydraulics handle long hydraulic jobs?
The useful heat clues are 25 gal of hydraulic capacity, 23 gpm flow, 2,250 psi pressure, and about 30.2 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Case IH 2294 make on paper?
Using 2,250 psi and 23 gpm, the rough pressure-flow estimate is about 30.2 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH 2294 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 6600 lbs | 2993 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
