The Case IH Farmall 55A tractor engine horsepower is 55 hp | 41.0 kW, and PTO horsepower is 47 hp | 35.0 kW.
Case IH Farmall 55A Horsepower Specs
| Engine gross horsepower | 55 hp | 41.0 kW |
|---|---|
| PTO horsepower claimed | 47 hp | 35.0 kW |
| PTO horsepower tested | 49.36 hp | 36.8 kW |
Case IH Farmall 55A Useful Horsepower Calculations
| PTO-to-engine power transfer | 85.5% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 2.9 ci per PTO hp |
| PTO horsepower per liter | 21.4 PTO hp per L |
| Engine size per engine horsepower | 2.5 ci per engine hp |
| Engine horsepower per liter | 25 engine hp per L |
| Rated speed per PTO horsepower | 57.4 rpm per PTO hp |
Case IH Farmall 55A Engine Specs
| Engine type | turbocharged diesel |
|---|---|
| Displacement | 135 ci | 2.2 L |
| Bore and stroke | 3.307×3.937 inches | 84 x 100 mm |
| Compression | 23.4:1 |
| Emissions | Tier 3 |
| Rated RPM | 2700 |
Case IH Farmall 55A Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Case IH Farmall 55A Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Farmall 55A Horsepower FAQ
How much horsepower does the Case IH Farmall 55A have?
The listed engine output is 55 hp, above the 35 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 55 hp.
How much PTO horsepower does the Case IH Farmall 55A have?
The listed PTO output is 47 hp, above the 28 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 47 hp.
How much engine power reaches the PTO on the Case IH Farmall 55A?
The PTO-to-engine transfer works out to 85.5%, from 55 engine hp to 47 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH Farmall 55A engine?
The engine displacement is 135 ci, above the 110 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Case IH Farmall 55A engine stressed for its PTO horsepower?
The engine has about 2.9 cubic inches per PTO hp, using 135 ci and 47 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Case IH Farmall 55A make?
The output density is about 21.4 PTO hp per liter, using 47 PTO hp and 2.2 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Case IH Farmall 55A rated at?
The rated speed is 2,700 rpm, above the 2,400 rpm benchmark average. A higher 2,700 rpm rating can make power well but may feel busier under load.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
