The Case IH Farmall 40B specifications include engine power rated at 41 hp (30.6 kW), transmission options including partially synchronized or hydrostatic and a listed weight of 3,725 lbs (1,689 kg).
Case IH Farmall 40B key specifications
| Engine power | 41 hp (30.6 kW) |
|---|---|
| Displacement | 153 cu in (2.5 L) |
| Transmission | partially synchronized or hydrostatic |
| Fuel capacity | 9.5 gal (36.0 L) |
| Weight | 3,725 lbs (1,689 kg) |
| Wheelbase | 69 inches (175 cm) |
| Rear PTO | independent |
Case IH Farmall 40B industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power41 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
Displacement2.5 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity9.5 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight3,725 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase69 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH Farmall 40B dimensions chart
Compare the main listed tractor dimensions using centimetres.
Power and performance
| Original price | $21,336 in 2012 (shuttle) |
|---|
Engine specifications
| Rated RPM | 2,600 |
|---|---|
| Air cleaner | dry |
| Pre-heating | glow plugs |
Transmission options
| Gear options | 16 forward and reverse or infinite forward and reverse (3-range) |
|---|
PTO and hitch
| Gear PTO (claimed) | 34 hp (25.4 kW) |
|---|---|
| Hydro PTO (claimed) | 32 hp (23.9 kW) |
| Rear hitch category | Category I |
| Hitch control | position control |
| Rear lift (at ends) | 2,756 lbs (1,250 kg) |
| Rear lift (at 24"/610mm) | 2,469 lbs (1,119 kg) |
| Drawbar | two-position swinging drawbar |
| Rear PTO speed | 540 rpm |
Hydraulics
| Hydraulic type | open center |
|---|---|
| Pump flow | 8.2 gpm (31.0 L/min) |
| Gear Steering flow | 4.1 gpm (15.5 L/min) |
| Hydro Steering flow | 5.5 gpm (20.8 L/min) |
Mechanical specifications
| Clutch | electro-hydraulic |
|---|---|
| Differential lock | mechanical rear |
| Steering | hydrostatic power |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 50 |
| Battery CCA | 660 |
| Battery volts | 12 |
| Battery AH | 80 |
Dimensions and weight
| Length | 121 inches (307 cm) |
|---|---|
| ROPS height | 96 inches (243 cm) |
Tires and tread
| Front tread | 51.7 inches (131 cm) |
|---|
Attachments
| Raise time | 4.1 seconds |
|---|---|
| dump | 3.8s |
| Lowering time | 2.0 seconds |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.

