The Case IH Farmall 120A specifications include engine power rated at 118 hp (88.0 kW), transmission options including power shuttle or synchronized shuttle and a listed weight of 8,091 to 9,524 lbs.
Case IH Farmall 120A key specifications
Engine power
118 hp (88.0 kW)
PTO power
96 hp (71.6 kW)
Displacement
273.7 cu in (4.5 L)
Transmission
power shuttle or synchronized shuttle
Fuel capacity
40 gal (151.4 L)
Weight
8,091 to 9,524 lbs
Rear PTO
independent
Case IH Farmall 120A industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power118 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power96 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement4.5 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity40 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight9,524 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Case IH Farmall 120A power chart
Compare the available engine, PTO and drawbar power ratings.
Engine power118 hp
PTO power96 hp
Tested PTO power104.5 hp
Tested drawbar power86.7 hp
Case IH Farmall 120A capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity151.4 L
Hydraulic capacity62.1 L
Engine oil11 L
Engine specifications
Bore/Stroke
4.094 × 5.197 inches (104 × 132 mm)
Fuel system
mechanical injection
Oil capacity
11.6 qt (11.0 L)
Starter
electric
Starter volts
12
Emissions
Tier III
Transmission options
Gear options
8 forward and reverse or 16 forward and 8 reverse
PTO and hitch
Drawbar (tested)
86.68 hp (64.6 kW)
PTO (tested)
104.48 hp (77.9 kW)
Rear hitch category
Category II
Rear lift (at 24"/610mm)
7,200 lbs (3,265 kg)
Rear PTO speed
540 or 1,000 rpm
Hydraulics
Hydraulic capacity
16.4 gal (62.1 L)
Hydraulic type
open center
Valves
2 to 4
Pump flow
22 gpm (83.3 L/min)
Total flow
31 gpm (117.3 L/min)
Steering flow
9 gpm (34.1 L/min)
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
120
Battery CCA
950
Battery volts
12
Dimensions and weight
Rear axle bar
3.1 × 98 inches (78 × 2,489 mm)
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
