Case IH Farmall 100C Specifications

The Case IH Farmall 100C specifications include engine power rated at 99 hp (73.8 kW), transmission options including mechanical shuttle or power shuttle and a listed weight of 6,989 to 8,157 lbs.

Case IH Farmall 100C key specifications

Engine power 99 hp (73.8 kW)
PTO power 85 hp (63.4 kW)
Displacement 206.7 cu in (3.4 L)
Transmission mechanical shuttle or power shuttle
Fuel capacity 30.3 gal (114.7 L)
Weight 6,989 to 8,157 lbs
Rear PTO independent

Case IH Farmall 100C industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power99 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power85 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement3.4 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity30.3 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight8,157 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average

Case IH Farmall 100C power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power99 hp
PTO power85 hp
Tested PTO power85.8 hp
Tested drawbar power66 hp

Case IH Farmall 100C capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity114.7 L
DEF capacity10.6 L

Case IH Farmall 100C dimensions chart

Compare the main listed tractor dimensions using centimetres.

Width192 cm
Cab height259 cm
ROPS height270 cm

Power and performance

Original price $53,227 in 2016 (mech-shuttle, ROPS, 2WD)

Engine specifications

Bore/Stroke 3.90 × 4.33 inches (99 × 110 mm)
Fuel system high pressure common rail electronic direct injection
Starter electric
Starter volts 12
Emissions Tier IV
Emission control selective catalytic reduction with cooled exhaust-gas recirculation (SCR)

Transmission options

Gear options 12 forward and reverse or 24 forward and reverse

PTO and hitch

Drawbar (tested) 66 hp (49.2 kW)
PTO (tested) 85.8 hp (64.0 kW)
Rear hitch category Category I/II
Hitch control top link draft sensing
Rear lift (at 24"/610mm) 4,339 lbs (1,968 kg)
Rear link ends telescopic link ends
Drawbar swinging extendable drawbar
Rear PTO speed 540 rpm, 1.375-inch shaft
PTO engine speed 540 PTO rpm at 1,957 engine rpm

Hydraulics

Hydraulic type open center
Valves 2 or 3
Pump flow 16..9 gpm (60.6 L/min)

Capacities

Exhaust fluid (DEF) 2.8 gal (10.6 L)

Mechanical specifications

Final drives inboard planetary

Electrical specifications

Electrical ground negative
Charging system alternator
Battery volts 12

Dimensions and weight

Width 75.7 inches (192 cm)
ROPS height 106.5 inches (270 cm)
Cab height 102.1 inches (259 cm)

Tires and tread

2WD Standard tires (ag) Front: 7.50-16. Rear: 16.9R30
4WD Standard tires (ag) Front: 11.2R24. Rear: 16.9R30 or Front: 14.9R24. Rear: 18.4R34

Attachments

Raise time 2.4 seconds

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.