The Case IH CS 48 tractor engine horsepower is 48 hp | 35.8 kW.
Case IH CS 48 Horsepower Specs
| Engine horsepower | 48 hp | 35.8 kW |
|---|
Case IH CS 48 Useful Horsepower Calculations
| Engine size per engine horsepower | 3.4 ci per engine hp |
|---|---|
| Engine horsepower per liter | 17.8 engine hp per L |
Case IH CS 48 Engine Specs
| Displacement | 164.8 ci | 2.7 L |
|---|---|
| Bore and stroke | 3.74×5.00 inches | 95 x 127 mm |
| Rated RPM | 2250 |
| Torque | 140 lb-ft | 189.8 Nm |
| Torque RPM | 1300 |
Case IH CS 48 Horsepower Comparison Charts
Engine horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH CS 48 Horsepower FAQ
How much horsepower does the Case IH CS 48 have?
The listed engine output is 48 hp, below the 80 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 48 hp.
How big is the Case IH CS 48 engine?
The engine displacement is 164.8 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
How much torque does the Case IH CS 48 have?
The listed torque is 140 lb-ft, below the 240 lb-ft benchmark average. With 140 lb-ft listed, gearing matters more when the tractor is loaded hard.
What rpm is the Case IH CS 48 rated at?
The rated speed is 2,250 rpm, close to the 2,200 rpm benchmark average. The 2,250 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
