Case IH 9390 Specifications

The Case IH 9390 specifications include engine power rated at 425 hp (316.9 kW), a full powershift transmission and a listed weight of 32,500 lbs (14,742 kg).

Case IH 9390 key specifications

Engine power 425 hp (316.9 kW)
PTO power 383 hp (285.6 kW)
Displacement 855 cu in (14.0 L)
Transmission full powershift
Fuel capacity 270 gal (1022.0 L)
Weight 32,500 lbs (14,742 kg)
Wheelbase 144 inches (365 cm)

Case IH 9390 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power425 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power383 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement14 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity270 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight32,500 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase144 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH 9390 power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power425 hp
PTO power383 hp

Case IH 9390 capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity1,022 L
Engine oil38.6 L
Coolant62.5 L

Case IH 9390 dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length713 cm
Wheelbase365 cm
Width243 cm

Engine specifications

Bore/Stroke 5.50 × 6.00 inches (140 × 152 mm)
Rated RPM 2,100
Oil capacity 40.8 qt (38.6 L)
Coolant capacity 66 qt (62.5 L)
Starter volts 12
Engine speed range 850-2,300
Oil change 250 h

Transmission options

Gear options 12 forward and 3 reverse or 24 forward and 6 reverse
Clutch wet disc

PTO and hitch

Rear hitch category Category IV
Rear lift (at 24"/610mm) 17,000 lbs (7,711 kg)
Rear PTO independent
Rear PTO speed 1,000 rpm

Hydraulics

Hydraulic type closed center
Hydraulic pressure 2,900 psi (200.0 bar)
Valves 4
Pump flow 30 gpm * Two separate 30 GPM sections. 113.6 L/min
Total flow 60 gpm (227.1 L/min)

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 125
Batteries 3
Battery CCA 625
Battery volts 12

Dimensions and weight

Length 281 inches (713 cm)
Width 96 inches (243 cm, width at fenders)
Exhaust height 149.6 inches (379 cm)
Maximum permitted weight 44,000 lbs (19,958 kg)
Front axle clearance 31.5 inches (80 cm)
Drawbar clearance 19.2 inches (48 cm)

Tires and tread

Front tire 20.8R42
Rear tire 20.8R42

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.