The Case IH 2594 dimension specs found are: width is 96 inches | 243 cm, wheelbase is 118 inches | 299 cm.
Width96 inches | 243 cm
Wheelbase118 inches | 299 cm
Case IH 2594 Dimensions
Overall width
96 inches | 243 cm
Wheelbase
118 inches | 299 cm
Rear tread
60 to 110 inches | 152 to 279 cm | 60 to 132 inches | 152 to 335 cm (long axle)
Case IH 2594 Weight
Shipping weight
14,875 lbs | 6747 kg
Operating weight
16,220 lbs | 7357 kg
Maximum capacity weight
20,500 lbs | 9298 kg
Case IH 2594 Tire Size Notes
Ag front
11.00×16 | 14Lx16
Ag rear
20.8×38 | 24.5×32
Case IH 2594 Dimension Comparison Charts
Width comparison
This model
96 in
Average
96 in
Low
78 in
High
120 in
Wheelbase comparison
This model
118 in
Average
115 in
Low
95 in
High
145 in
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 2594 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 2594 is about 96 inches | 243 cm wide. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 2594 Dimensions FAQ
Is the Case IH 2594 narrow enough for tight storage?
The listed width is middle-of-the-pack at 96 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Does the Case IH 2594 have a short or long wheelbase?
The wheelbase is average for the category at 118 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
