The Case IH 2594 specifications include engine power rated at 217 hp (161.8 kW), transmission options including three-speed power shift or four-speed power shift and a listed weight of 14,875 to 16,220 lbs.
Case IH 2594 key specifications
| Engine power |
217 hp (161.8 kW) |
| PTO power |
180 hp (134.2 kW) |
| Displacement |
504 cu in (8.3 L) |
| Transmission |
three-speed power shift or four-speed power shift |
| Fuel capacity |
85 gal (321.7 L) |
| Weight |
14,875 to 16,220 lbs |
| Wheelbase |
118 inches (299 cm) |
Case IH 2594 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power217 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power180 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity85 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight16,220 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 2594 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power159.6 hp
Case IH 2594 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity321.7 L
Hydraulic capacity121.1 L
Case IH 2594 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.625 × 5.00 inches (117 × 127 mm) |
| Rated RPM |
2,100 |
| Oil capacity |
30 qt (28.4 L) |
| Coolant capacity |
44 qt (41.6 L) |
| Starter volts |
12 |
Transmission options
| Gear options |
12 forward and 3 reverse or 24 forward and 3 reverse |
| Oil capacity |
128 qt (121.1 L) |
PTO and hitch
| Drawbar (claimed) |
161 hp (120.1 kW) |
| Drawbar (tested) |
159.64 hp (119.0 kW) |
| PTO (tested) |
182.07 hp (135.8 kW) |
| Rear hitch category |
Category III |
| Rear lift (at 24"/610mm) |
7,750 lbs (3,515 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic capacity |
32 gal (121.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,250 psi (155.1 bar) |
| Valves |
2 to 4 |
| Pump flow |
27 gpm (102.2 L/min) |
| Steering flow |
8 gpm (30.3 L/min) |
| Steering pressure |
2,000 psi (137.9 bar) |
Mechanical specifications
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
72 |
| Battery volts |
12 |
Dimensions and weight
| Width |
96 inches (243 cm) |
| Shipping weight |
14,875 lbs (6,747 kg) |
| Operating weight |
16,220 lbs (7,357 kg) |
| Rear axle bar |
3.875 × 96 inches (98 × 2,438 mm) or 3.875 × 120 inches (98 × 3,048 mm) |
| Maximum permitted weight |
20,500 lbs (9,298 kg) |
Tires and tread
| Rear tread |
60 to 110 inches (152 to 279 cm) or 60 to 132 inches (152 to 335 cm, long axle) |
| Front tire |
11.00-16 or 14L-16 |
| Rear tire |
20.8-38 or 24.5-32 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
