Case IH 1896 Specifications

The Case IH 1896 specifications include PTO power rated at 95 hp (70.8 kW), a three-speed power shift transmission and a listed weight of 13,495 lbs (6,121 kg).

Case IH 1896 key specifications

PTO power 95 hp (70.8 kW)
Displacement 359 cu in (5.9 L)
Transmission three-speed power shift
Fuel capacity 65 gal (246.0 L)
Weight 13,495 lbs (6,121 kg)
Wheelbase 108 inches (274 cm)
Rear PTO independent

Case IH 1896 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

PTO power95 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement5.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity65 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight13,495 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase108 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH 1896 power chart

Compare the available engine, PTO and drawbar power ratings.

PTO power95 hp
Tested PTO power95.9 hp
Tested drawbar power84.5 hp

Case IH 1896 capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity246 L
Hydraulic capacity94.6 L
Engine oil15.1 L
Coolant20.8 L

Case IH 1896 dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length434 cm
Wheelbase274 cm
Cab height299 cm
ROPS height293 cm
Ground clearance40 cm

Engine specifications

Bore/Stroke 4.016 × 4.724 inches (102 × 120 mm)
Rated RPM 2,100
Compression 17.5:1
Air cleaner dual dry elements
Oil capacity 16 qt (15.1 L)
Coolant capacity 22 qt (20.8 L)
Starter volts 12
Engine speed range 800-2,250

Transmission options

Gears 12 forward and 3 reverse
Oil capacity 100 qt (94.6 L)

PTO and hitch

Drawbar (tested) 84.51 hp (63.0 kW)
PTO (tested) 95.92 hp (71.5 kW)
Rear hitch category Category III/II
Rear lift 6,600 lbs (2,993 kg)
Rear PTO speed 540 or 1,000 rpm, 1.375-inch shaft

Hydraulics

Hydraulic capacity 25 gal (94.6 L)
Hydraulic type closed center
Hydraulic pressure 2,250 psi (155.1 bar)
Valves 2 to 4
Pump flow 23 gpm (87.1 L/min)
Steering flow 8 gpm (30.3 L/min)

Mechanical specifications

Differential lock electric rear

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 105
Battery volts 12

Dimensions and weight

Length 171 inches (434 cm)
Ground clearance 16 inches (40 cm)
Operating weight 13,495 lbs (6,121 kg, duals)
Rear axle bar 3.50 × 96 inches (88 × 2,438 mm) or 3.50 × 120 inches (88 × 3,048 mm)
ROPS height 115.4 inches (293 cm)
Folded ROPS height 91.4 inches (232 cm)
Cab height 118 inches (299 cm)
Exhaust height 116 inches (294 cm)

Tires and tread

Rear tread 60 to 110 inches (152 to 279 cm) or 60 to 132 inches (152 to 335 cm)
2WD Standard tires (ag) Front: 11.00-16. Rear: 18.4-38
4WD Standard tires (ag) Front: 16.9-26. Rear: 18.4-38

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.