The Bobcat T 180 ACS skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 540 CCA rating is low for Bobcat skid-steers in this dataset.
ModelT 180 ACS
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
540 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps540 CCA
Low
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
540 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 24 with about 540 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
Family-match guidance: The battery on the Bobcat T180 H ACS skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the Bobcat website for the most accurate information. Verify the exact access panel/compartment for the machine serial number before service.
ID
Model details
Equipment identity
Brand
Bobcat
Model
T 180 ACS
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Bobcat T180 ACS skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery, place the new battery in the compartment, and reconnect the terminals in the reverse order, ensuring they are secure.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat T 180 ACS?
Quick answer
The Bobcat T180 ACS skid steer loader uses a Group 24 battery. For replacement, it's important to ensure the battery meets the required specifications, such as cold cranking amps (CCA).
?
How many CCA does the Bobcat T 180 ACS need?
Quick answer
The recommended official Bobcat T 180 ACS skid-steer loader battery is a 540 CCA dry battery, part number 6670251, designed for heavy-duty use in Bobcat equipment.
?
What voltage battery does the Bobcat T 180 ACS use?
Quick answer
The official Bobcat T 180 ACS skid-steer loader uses a 12-volt battery for starting and electrical systems.
?
Where is the battery on the Bobcat T 180 ACS?
Quick answer
Family-match guidance: The battery on the Bobcat T180 H ACS skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the Bobcat website for the most accurate information. Verify the exact access panel/compartment for the machine serial number before service.
?
What is the best replacement battery for the Bobcat T 180 ACS?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 24 with about 540 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
