The John Deere 9460R tractor tire size is front 480/80R46 and the rear is 710/70R42.
Front tire480/80R46
Rear tire710/70R42
Front/rear setupDifferent front and rear tire sizes
Tire pressure18 PSI, 35 PSI
Rim diameter46 in front, 42 in rear
Ballast50 gal
John Deere 9460R Tire Size Details
Front tire size
480/80R46
Rear tire size
710/70R42
Front/rear setup
Different front and rear tire sizes
Front tire construction
Metric radial
Rear tire construction
Metric radial
Front section width
480 mm
Rear section width
710 mm
Front aspect ratio
80%
Rear aspect ratio
70%
Front rim diameter
46 in
Rear rim diameter
42 in
Approx front overall diameter
about 76.2 in
Approx rear overall diameter
about 81.1 in
Tire pressure
18 PSI, 35 PSI
Loaded rear tire ballast / fluid capacity
50 gal
Tire Size Comparison Chart
Front rim diameter comparison
This model
46 in
Average
17.1 in
Low
4 in
High
50 in
Rear rim diameter comparison
This model
42 in
Average
25.5 in
Low
0 in
High
50 in
John Deere 9460R Extra Tire Notes
Tire size note
The John Deere 9460R uses different front and rear tire sizes in this data: front 480/80R46 (46 in rim, 480 mm width) and rear 710/70R42 (42 in rim, 710 mm width)
Pressure note
For the John Deere 9460R with front 480/80R46 and rear 710/70R42 tires, the pressure values captured in the answer are 18 PSI, 35 PSI. Tire pressure is load-dependent, so use this as a reference value rather than a universal setting
Ballast note
For the John Deere 9460R rear 710/70R42 tires, the ballast figure captured in the answer is 50 gal. Liquid ballast capacity can change by tire brand, fill percentage, wheel setup and ballast fluid type
Official information note
Mistakes do happen. Tire sizes can change by year, axle, wheel/rim option, tyre brand, tread type and local market. Please check the tire sidewall, operator manual and official deere.com website for official information.
