Quick answer:
The John Deere 2855N battery size is listed as 12 V.
Voltage12 V
John Deere 2855N Battery Specs
| Battery voltage | 12 V |
|---|
Battery Spec Comparisons Chart
Voltage comparison
John Deere 2855N Battery FAQ
| Battery voltage | The official battery voltage for the John Deere 2855N tractor is 12 volts |
|---|---|
| Battery group size | The official battery group size for the John Deere 2855N tractor is two batteries with a Cold Cranking Amps (CCA) rating of 400 each |
| Battery CCA | John Deere 2855N tractors use two 12-volt batteries with a Cold Cranking Amps (CCA) rating of 400 each |
| Battery location | The battery on the John Deere 2855N tractor is located underneath the right access step. You may need to open the flap and possibly remove the access step to access it |
| Battery replacement steps | To replace the battery on a John Deere 2855N tractor, first turn off the ignition, remove the negative (-) battery cable, then the positive (+) cable, and finally take out the old battery. Install the new battery by connecting the positive cable first, followed by the negative cable |
| Bad battery symptoms | Common symptoms of a failing battery in a John Deere 2855N tractor include hard starting or no response when trying to start, clicking sounds, and rapid battery drain. Additionally, visible corrosion on battery terminals and issues with the charging system can also indicate battery problems |
Official information note
Mistakes do happen. Please check official deere.com website for official information.







