John Deere 2450 Oil Capacity (9 Quarts) + Oil Type Guide

The John Deere 2450 takes 9 quarts / 8.5 litres of engine oil.

John Deere 2450 Oil Capacity and Type

Engine Oil Capacity 9 qt / 8.5 L
Recommended Oil Name John Deere Plus-50 II
Recommended Oil Type 15W-40 heavy-duty diesel engine oil
Cold Weather Oil 10W-30 diesel engine oil
Engine John Deere 239.2 ci / 3.9L 4-cylinder diesel
Aspiration Naturally aspirated
Cylinders 4-cylinder diesel
Rated RPM 2300 rpm
Oil Change Interval Every 200 to 250 hours

How Much Oil Does a John Deere 2450 Take?

The John Deere 2450 takes 9 quarts / 8.5 litres of engine oil.

Use John Deere Plus-50 II 15W-40 or another high-quality diesel-rated 15W-40 engine oil. For colder operating conditions, use a suitable 10W-30 diesel engine oil.

Fill slightly under the listed capacity first, run the engine, let it settle, then check the dipstick and top up to the full mark.

Quick Specs Overview

9 qtEngine Oil
15W-40Diesel Oil
200–250 hrsInterval
70 HPEngine Power

Best Oil to Use

  • John Deere Plus-50 II 15W-40 engine oil
  • Any quality diesel-rated 15W-40 oil meeting modern diesel specifications
  • 10W-30 diesel oil for colder operating conditions
  • Replace the engine oil filter at every oil change

Oil Capacity Comparison

2450
9 qt
2040
9 qt
2140
8 qt
2030
6 qt

Oil Change Intervals

Engine Oil Every 200 to 250 hours
Engine Oil Filter Replace every oil change
Fuel Filters Every 500 hours
Air Filter Clean regularly; replace as needed

Other John Deere 2450 Fluid Capacities

Engine Oil 9 qt / 8.5 L
Coolant Capacity With Cab 16 qt / 15 L
Coolant Capacity Without Cab 13.6 qt / 13 L
Fuel Tank 22.2 gal / 84.0 L
Optional Fuel Tank 35.9 gal / 135.9 L
MFWD Housing 5.6 qt / 5.3 L
Transmission Oil – Collar-Shift 36 qt / 34 L
Transmission Oil – Syncro-Range 54 qt / 51 L

John Deere 2450 Engine Specs

Engine John Deere 239.2 ci diesel
Displacement 239.2 ci / 3.9 L
Cylinders 4-cylinder
Aspiration Naturally aspirated
Rated Power 70 HP / 52.2 kW
Rated RPM 2300 rpm
Cooling System Liquid-cooled

Common Mistakes

  • Using petrol engine oil instead of diesel-rated oil
  • Assuming the 2450 uses the same coolant capacity with and without cab
  • Skipping the oil filter replacement
  • Overfilling before checking the dipstick
  • Confusing collar-shift transmission oil capacity with Syncro-Range capacity

Summary

The John Deere 2450 takes 9 quarts / 8.5 litres of engine oil. The best oil choice is John Deere Plus-50 II 15W-40 or another quality diesel-rated 15W-40 diesel engine oil. The 2450 uses a 239.2 ci / 3.9L 4-cylinder diesel engine, with 16 quarts of coolant with cab, a 22.2 gallon fuel tank, and either 36 quarts or 54 quarts of transmission oil depending on transmission type.

Leave a Comment