The John Deere 2140 takes 8 quarts / 7.6 litres of engine oil.
John Deere 2140 Oil Capacity and Type
| Engine Oil Capacity | 8 qt / 7.6 L |
| Recommended Oil Name | John Deere Plus-50 II |
| Recommended Oil Type | 15W-40 heavy-duty diesel engine oil |
| Cold Weather Oil | 10W-30 diesel engine oil |
| Engine | John Deere 239.2 ci / 3.9L 4-cylinder turbocharged diesel |
| Aspiration | Turbocharged |
| Cylinders | 4-cylinder diesel |
| Rated RPM | 2500 rpm |
| Oil Change Interval | Every 200 to 250 hours |
How Much Oil Does a John Deere 2140 Take?
The John Deere 2140 takes 8 quarts / 7.6 litres of engine oil.
Use John Deere Plus-50 II 15W-40 or another high-quality diesel-rated 15W-40 engine oil. For colder operating conditions, use a suitable 10W-30 diesel engine oil.
Fill slightly under the listed capacity first, run the engine, let it settle, then check the dipstick and top up to the full mark.
Quick Specs Overview
8 qtEngine Oil
15W-40Diesel Oil
200–250 hrsInterval
89.9 HPGross Power
Best Oil to Use
- John Deere Plus-50 II 15W-40 engine oil
- Any quality diesel-rated 15W-40 oil meeting modern diesel specifications
- 10W-30 diesel oil for colder operating conditions
- Replace the engine oil filter at every oil change
Oil Capacity Comparison
Oil Change Intervals
| Engine Oil | Every 200 to 250 hours |
| Engine Oil Filter | Replace every oil change |
| Fuel Filters | Every 500 hours |
| Air Filter | Clean regularly; replace as needed |
Other John Deere 2140 Fluid Capacities
| Engine Oil | 8 qt / 7.6 L |
| Coolant Capacity | 16 qt / 15.1 L |
| Fuel Tank | 22.4 gal / 84.8 L |
| Hydraulic System | 11 gal / 41.6 L |
| Hydraulic Pump Flow | 12.4 gpm / 46.9 L/min |
| Hydraulic Pressure | 2466 psi / 170 bar |
John Deere 2140 Engine Specs
| Engine | John Deere 239.2 ci turbocharged diesel |
| Displacement | 239.2 ci / 3.9 L |
| Cylinders | 4-cylinder |
| Aspiration | Turbocharged |
| Fuel System | Direct injection |
| Compression Ratio | 16.8:1 |
| Rated RPM | 2500 rpm |
| Torque | 199 lb-ft / 269.8 Nm |
| Torque RPM | 1600 rpm |
| Cooling System | Liquid-cooled |
Common Mistakes
- Using petrol engine oil instead of diesel-rated oil
- Assuming the 2140 takes 9 quarts like the 2040
- Skipping the oil filter replacement
- Overfilling before checking the dipstick
- Confusing engine oil capacity with hydraulic system capacity
Summary
The John Deere 2140 takes 8 quarts / 7.6 litres of engine oil. The best oil choice is John Deere Plus-50 II 15W-40 or another quality diesel-rated 15W-40 diesel engine oil. The 2140 uses a 239.2 ci / 3.9L 4-cylinder turbocharged diesel engine, with 16 quarts of coolant, a 22.4 gallon fuel tank, and an 11 gallon hydraulic system capacity.







