John Deere 4240 Oil Capacity (17 Quarts) + Oil Type

The John Deere 4240 takes 17 quarts / 16.1 litres of engine oil.

John Deere 4240 Oil Capacity and Type

Engine Oil Capacity 17 qt / 16.1 L
Recommended Oil Name John Deere Plus-50 II
Recommended Oil Type 15W-40 heavy-duty diesel engine oil
Cold Weather Oil 10W-30 diesel engine oil
Engine John Deere 466 ci / 7.6L 6-cylinder diesel
Aspiration Naturally aspirated
Cylinders 6-cylinder diesel
Rated RPM 2200 rpm
Oil Change Interval Every 200 to 250 hours

How Much Oil Does a John Deere 4240 Take?

The John Deere 4240 takes 17 quarts / 16.1 litres of engine oil.

Use John Deere Plus-50 II 15W-40 or another high-quality diesel-rated 15W-40 engine oil. For colder operating conditions, use a suitable 10W-30 diesel engine oil.

Fill slightly under the listed capacity first, run the engine, let it settle, then check the dipstick and top up to the full mark.

Quick Specs Overview

17 qtEngine Oil
15W-40Diesel Oil
200–250 hrsInterval
110 HPPTO Power

Best Oil to Use

  • John Deere Plus-50 II 15W-40 engine oil
  • Any quality diesel-rated 15W-40 oil meeting modern diesel specifications
  • 10W-30 diesel oil for colder operating conditions
  • Replace the engine oil filter at every oil change

Oil Capacity Comparison

4240
17 qt
4230
17 qt
4050
18 qt
3020
8 qt

Oil Change Intervals

Engine Oil Every 200 to 250 hours
Engine Oil Filter Replace every oil change
Fuel Filters Every 500 hours
Air Filter Clean regularly; replace as needed

Other John Deere 4240 Fluid Capacities

Engine Oil 17 qt / 16.1 L
Coolant Capacity 30 qt / 28.4 L
Fuel Tank 46 gal / 174.1 L
Hydraulic System 11 gal / 41.6 L
Transmission / Hydraulic Oil 62 qt / 58.7 L
Hydraulic Pump Flow 23 gpm / 87.1 L/min

John Deere 4240 Engine Specs

Engine John Deere 466 ci diesel
Displacement 466 ci / 7.6 L
Cylinders 6-cylinder
Aspiration Naturally aspirated
Compression Ratio 17.0:1
Rated RPM 2200 rpm
Cooling System Liquid-cooled

Common Mistakes

  • Using petrol engine oil instead of diesel-rated oil
  • Skipping the oil filter replacement
  • Overfilling before checking the dipstick
  • Confusing engine oil capacity with hydraulic or transmission oil capacity
  • Assuming the 4240 has the same coolant capacity as the 4230

Summary

The John Deere 4240 takes 17 quarts / 16.1 litres of engine oil. The best oil choice is John Deere Plus-50 II 15W-40 or another quality diesel-rated 15W-40 engine oil. The 4240 uses a naturally aspirated 466 ci / 7.6L 6-cylinder diesel engine, with 30 quarts of coolant, a 46 gallon fuel tank, and a 62 quart transmission / hydraulic oil capacity.

Leave a Comment