The John Deere 3020 takes 8 quarts / 7.6 litres of engine oil at service refill. Dry crankcase capacity is 9 quarts / 8.5 litres.
John Deere 3020 Oil Capacity and Type
Engine Oil Service Refill
8 qt / 7.6 L
Dry Crankcase Capacity
9 qt / 8.5 L
Recommended Oil Name
John Deere Plus-50 II
Recommended Oil Type – Diesel
15W-40 heavy-duty diesel engine oil
Cold Weather Oil – Diesel
10W-30 diesel engine oil
Gas / LP Oil Type
SAE 10W-30 or SAE 30 engine oil, depending on temperature
Diesel Engine
John Deere 270 ci / 4.4L 4-cylinder diesel
Gasoline Engine
John Deere 241 ci / 3.9L 4-cylinder gasoline
LP-Gas Engine
John Deere 227 ci / 3.7L 4-cylinder LP-gas
Rated RPM
2500 rpm
Oil Change Interval
Every 200 hours or annually
How Much Oil Does a John Deere 3020 Take?
For a normal oil change, the John Deere 3020 takes 8 quarts / 7.6 litres of engine oil.
The 9 quart / 8.5 litre figure is the dry crankcase capacity, not the normal refill amount after draining the oil.
Use 8 quarts as the main refill number. Add most of the oil first, run the engine, let it settle, then check the dipstick and top up if needed.
Quick Specs Overview
8 qtService Refill
9 qtDry Capacity
15W-40Diesel Oil
200 hrsOil Interval
Best Oil to Use
John Deere Plus-50 II 15W-40 for diesel models
Any quality diesel-rated 15W-40 oil for warm-weather diesel use
10W-30 diesel oil for colder diesel operating conditions
SAE 10W-30 or SAE 30 engine oil for gasoline and LP-gas models, depending on temperature
Replace the oil filter at every oil change
Oil Capacity Comparison
3020 Refill
8 qt
3020 Dry
9 qt
4230
17 qt
4050
18 qt
Oil Change Intervals
Engine Oil
Every 200 hours or annually
Engine Oil Filter
Replace every oil change
Air Cleaner
Service oil-bath air cleaner regularly
Fuel Filters
Service according to usage and fuel condition
Other John Deere 3020 Fluid Capacities
Engine Oil – Service Refill
8 qt / 7.6 L
Engine Oil – Dry System
9 qt / 8.5 L
Cooling System
19 qt / 18 L
Fuel Tank – Diesel / Gasoline
29 gal / 109.8 L
Fuel Tank – LP-Gas
33.6 gal / 127.2 L
Transmission-Hydraulic – Syncro-Range Service
32 qt / 30.9 L
Transmission-Hydraulic – Syncro-Range Dry
11 gal / 41.6 L
Transmission-Hydraulic – Power Shift Service
44 qt / 41.6 L
Transmission-Hydraulic – Power Shift Dry
14 gal / 53.0 L
John Deere 3020 Engine Specs
Diesel Engine
John Deere 270 ci diesel
Diesel Displacement
270 ci / 4.4 L
Gasoline Engine
John Deere 241 ci / 3.9 L gasoline
LP-Gas Engine
John Deere 227 ci / 3.7 L LP-gas
Cylinders
4-cylinder
Rated RPM
2500 rpm
Cooling System
Liquid-cooled
Common Mistakes
Using 9 quarts as the normal refill amount instead of the dry-system capacity
Using gasoline engine oil in a diesel 3020
Skipping the oil filter replacement
Overfilling before checking the dipstick
Confusing engine oil capacity with transmission-hydraulic capacity
Summary
The John Deere 3020 takes 8 quarts / 7.6 litres of engine oil for a normal service refill. The dry crankcase capacity is 9 quarts / 8.5 litres. Diesel models should use John Deere Plus-50 II 15W-40 or another diesel-rated oil, while gasoline and LP-gas models need the correct engine oil for their fuel type and operating temperature.
