The John Deere 6110M takes 16.9 quarts / 16 litres of engine oil with the filter.
John Deere 6110M Oil Capacity and Type
Engine Oil Capacity
16.9 qt / 16 L with filter
Recommended Oil Name
John Deere Plus-50 II
Recommended Oil Type
15W-40 diesel engine oil
Cold Weather Oil
10W-30 or 5W-40 diesel engine oil
Oil Specification
Diesel-rated low-ash oil suitable for Final Tier 4 engines
Engine
John Deere PowerTech EWL 4.5L diesel
Cylinders
4-cylinder turbocharged diesel
Engine Power
110 HP / 81 kW
Oil Change Interval
500 hours with Plus-50 II oil and John Deere filter; 250 hours if conditions are not met
How Much Oil Does a John Deere 6110M Take?
The John Deere 6110M takes 16.9 quarts / 16 litres of engine oil when the oil filter is replaced.
Use John Deere Plus-50 II 15W-40 for normal service. For colder operating conditions, use a suitable 10W-30 or 5W-40 diesel engine oil.
The 500-hour oil interval only applies when using John Deere Plus-50 II oil, a John Deere oil filter, and diesel fuel with sulfur content below 15 ppm. Otherwise, change oil and filter every 250 hours.
Quick Specs Overview
16.9 qtEngine Oil
15W-40Oil Type
500 hrsMax Interval
110 HPEngine Power
Best Oil to Use
John Deere Plus-50 II 15W-40 engine oil
Diesel-rated low-ash engine oil for emissions-equipped engines
10W-30 diesel oil for cooler climates
5W-40 synthetic diesel oil for cold starts and harsh conditions
Replace the engine oil filter at every oil change
Oil Capacity Comparison
6110M
16.9 qt
5100M
13.7 qt
5065E
9 qt
Oil Change Intervals
Engine Oil
500 hours with Plus-50 II oil and John Deere filter
Shorter Interval
250 hours if extended-interval conditions are not met
Oil Filter
Replace with every engine oil change
Primary Fuel Filter
Every 500 hours
Final Fuel Filter
Every 500 hours
Primary Air Filter
Every 1500 hours or 2 years
Other John Deere 6110M Fluid Capacities
Engine Oil
16 L / 4.2 gal / 16.9 qt
Fuel Tank
195 L / 51.5 gal
DEF Tank
13 L / 3.4 gal
Cooling System
22 L / 5.8 gal
Transmission / Hydraulics
52 L / 13.7 gal
Extra With Creeper
1 L / 0.3 gal
Front PTO Oil
2.6 L / 0.69 gal, if equipped
John Deere 6110M Engine Specs
Engine
John Deere PowerTech EWL
Displacement
275 cu in / 4.5 L
Cylinders
4-cylinder
Aspiration
Single turbocharger with wastegate
Rated Engine Power
110 HP / 81 kW
Rated Power With IPM
130 HP / 96 kW
Rated PTO Power
84 HP / 62 kW
Rated RPM
2100 rpm
Common Mistakes
Listing 15.5 L instead of the correct 16 L crankcase capacity
Using non-diesel oil in a Final Tier 4 tractor
Assuming the 500-hour interval applies with any oil or filter
Skipping the oil filter replacement
Confusing engine oil capacity with transmission / hydraulic capacity
Summary
The John Deere 6110M takes 16.9 quarts / 16 litres of engine oil with the filter. The best oil choice is John Deere Plus-50 II 15W-40. The oil change interval is 500 hours only when using Plus-50 II oil, a John Deere oil filter, and ultra-low-sulfur diesel; otherwise use a 250-hour interval.
