The Case SR175 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 800 CCA rating is average for Case skid-steers in this dataset.
ModelSR175
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps800 CCA
Average
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
800 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Case SR175 skid steer loader is typically a 12-volt battery with a minimum of 650 CCA (Cold Cranking Amps). For specific battery specifications and options, it's recommended to check with authorized dealers or parts suppliers for the most suitable battery model.
LC
Battery location
Where the battery is mounted
Family-match guidance: The battery on the Case SR175 Skid Steer Loader is typically located under the seat or in the rear compartment of the machine. For replacement, it's important to refer to the specific model's manual for detailed specifications and procedures. Verify the exact access panel/compartment for the machine serial number before service.
ID
Model details
Equipment identity
Brand
Case
Model
SR175
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case SR175 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. For battery specifications and replacement details, refer to the Case parts manuals.
?
What battery size fits the Case SR175?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (SR 175); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Case SR175 need?
Quick answer
The recommended battery for the Case SR175 skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 650 to 800 CCA. For specific battery specifications and replacement options, it's best to consult the official Case website or a local dealer.
?
What voltage battery does the Case SR175 use?
Quick answer
The Case SR175 skid steer loader typically uses a 12-volt battery for starting and electrical systems.
?
Where is the battery on the Case SR175?
Quick answer
Family-match guidance: The battery on the Case SR175 Skid Steer Loader is typically located under the seat or in the rear compartment of the machine. For replacement, it's important to refer to the specific model's manual for detailed specifications and procedures. Verify the exact access panel/compartment for the machine serial number before service.
?
What is the best replacement battery for the Case SR175?
Quick answer
The best replacement battery for a Case SR175 skid steer loader is typically a 12-volt battery with a minimum of 650 CCA (Cold Cranking Amps). For specific battery specifications and options, it's recommended to check with authorized dealers or parts suppliers for the most suitable battery model.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
