The Case 1825 B skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 500 CCA rating is low for Case skid-steers in this dataset.
Model1825 B
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
500 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps500 CCA
Low
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
500 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Case 1825B skid steer loader is typically a heavy-duty battery with a high cold cranking amp (CCA) rating, suitable for the machine's power demands and operating conditions. It's important to check the specific battery specifications and compatibility for your model before purchasing.
LC
Battery location
Where the battery is mounted
The battery on the Case 1825B skid steer loader is typically located under the floor panel near the rear of the machine, requiring removal of the floor to access it.
ID
Model details
Equipment identity
Brand
Case
Model
1825 B
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case 1825B skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. Additionally, you may notice dim or flickering lights and blown fuses.
?
What battery size fits the Case 1825 B?
Quick answer
The official battery group size for the Case 1825B skid steer loader is Group 24. For replacement, it's important to choose a battery that meets the specifications for cold cranking amps (CCA) suitable for your climate.
?
How many CCA does the Case 1825 B need?
Quick answer
The recommended Cold Cranking Amps (CCA) for the Case 1825B skid steer loader battery is typically around 500 CCA, which is suitable for cold weather conditions. Always verify the specific requirements for your model to ensure optimal performance.
?
What voltage battery does the Case 1825 B use?
Quick answer
The official battery voltage for the Case 1825B Skid Steer Loader is 12 volts. When replacing the battery, ensure it meets the specifications for optimal performance.
?
Where is the battery on the Case 1825 B?
Quick answer
The battery on the Case 1825B skid steer loader is typically located under the floor panel near the rear of the machine, requiring removal of the floor to access it.
?
What is the best replacement battery for the Case 1825 B?
Quick answer
The best replacement battery for the Case 1825B skid steer loader is typically a heavy-duty battery with a high cold cranking amp (CCA) rating, suitable for the machine's power demands and operating conditions. It's important to check the specific battery specifications and compatibility for your model before purchasing.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
