The Bobcat T 140 ACS skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 950 CCA rating is high for Bobcat skid-steers in this dataset.
ModelT 140 ACS
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
950 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps950 CCA
High
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
950 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 24 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat T140 ACS skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact a Bobcat dealer.
ID
Model details
Equipment identity
Brand
Bobcat
Model
T 140 ACS
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
The Bobcat T140 ACS skid-steer loader uses a 12-volt battery; replacement requires disconnecting the negative terminal first, removing the old battery, installing the new one with the positive terminal connected first, and then securing the battery hold-down and reconnecting the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat T 140 ACS?
Quick answer
The official battery group size for the Bobcat T140 ACS skid steer loader is Group 24. For replacement, it's important to check the specific requirements in the owner's manual or consult a dealer for the best options.
?
How many CCA does the Bobcat T 140 ACS need?
Quick answer
The Bobcat T140 ACS skid-steer loader uses a Bobcat heavy-duty battery designed for tough conditions, featuring reinforced plates and a lead-welded post seal for reliable cranking power in extreme environments.
?
What voltage battery does the Bobcat T 140 ACS use?
Quick answer
The Bobcat T140 ACS skid steer loader has a battery voltage of 12 volts. For specific battery replacement options, it's best to consult the Bobcat parts catalog or contact a local dealer.
?
Where is the battery on the Bobcat T 140 ACS?
Quick answer
The battery on the Bobcat T140 ACS skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact a Bobcat dealer.
?
What is the best replacement battery for the Bobcat T 140 ACS?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 24 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
