Weight summary
The published International Harvester 560 weight is 6,563–9,460 lb (2,976–4,291 kg). The primary figure used for comparisons is 6,563 lb (2,976 kg), listed as Operating — gas. The published configurations span 2,897 lb, a 44.1% difference from the lightest listed setup.
How this weight compares
Standard-Tread Tractor peers · 53 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | International Harvester |
|---|---|
| Model | 560 |
| Category | Farm tractor |
| Model years | 1958 – 1963 |
| Tractor type | Standard-Tread Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Operating | gas | 6,563 lb | 2,976 kg | 3.28 | — |
| Operating | diesel | 6,785 lb | 3,077 kg | 3.39 | — |
| Ballasted | — | 9,460 lb | 4,291 kg | 4.73 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Farmall 560 (6563 lb)
- Kubota M1-85 (6570 lb)
- International Harvester 634 (6546 lb)
- John Deere 70 (6538 lb)
- John Deere 2040 (6536 lb)
Closest comparable tractors
- Allis Chalmers 25-40 E (7000 lb)
- J.I. Case 610 (7625 lb)
- J.I. Case 600 (7500 lb, 70 hp)
- International Harvester 10-20 Titan (5525 lb)
- J.I. Case 830 (5694 lb, 66 hp)
International Harvester 560 weight FAQ
How much does an International Harvester 560 weigh?
The International Harvester 560 weighs 6,563 lb (2,976 kg) using the published Operating — gas figure. Across the published configurations on this page, weight ranges from 6,563 to 9,460 lb (2,976 to 4,291 kg).
What is the operating weight of the International Harvester 560?
The published operating weight is 6,563–6,785 lb (2,977–3,078 kg). This is usually a more useful real-world figure than a bare shipping specification, although ballast, loader, fuel, implements and tire setup can still increase actual working weight.
How much does the International Harvester 560 weigh with ballast?
The published ballasted weight is 9,460 lb (4,291 kg). That is up to 2,897 lb (44.1%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the International Harvester 560 heavy or light for a standard-tread tractor?
It is close to average for its peer group. The representative figure sits at about the 39th percentile, near the middle of the standard-tread tractor peers. That puts it in the average range for this comparison. It is 1,836 lb lighter than the peer-group average of 8,399 lb.
How wide is the International Harvester 560 for transport?
The maximum published tractor width is 72 in (6 ft). That is 30 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the International Harvester 560 weight-to-horsepower ratio?
Using the page’s representative 6,563 lb weight and 72.5 hp power figure, the tractor carries about 90.5 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
