The Farmall F-30 tractor weighs 5,300 lb (2,404 kg) using its primary published weight. That places it around the 10th percentile among comparable row-crop tractors, lighter than about 90% of its peers. With 24.9 hp, the tractor carries about 213.3 lb of published weight per horsepower.
The published Farmall F-30 weight is 5,300 lb (2,404 kg). The primary figure used for comparisons is 5,300 lb (2,404 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Representative published weight
Very light
5,300 lb
Low5,300 lb
This model5,300 lb
Average14,006 lb
High23,810 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight5,300 lb (2,404 kg)
Overall weight bandMidweight
Tractor typeRow-Crop Tractor
Primary horsepower24.9 hp / 18.5 kW
Max length147 in (373 cm)
Max width90 in (228 cm)
Overview
Model information
Manufacturer
Farmall
Model
F-30
Category
Farm tractor
Model years
1931 – 1939
Tractor type
Row-Crop Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
5,300 lb
2,404 kg
2.65
—
Dimensions, power & hauling
Technical details
Dimensions
Length147 in (373 cm)
Width90 in (228 cm)
Height81 in (205 cm)
Power & weight ratios
Primary power24.9 hp (18.5 kW)
Power basisDrawbar (tested)
Weight per horsepower213.3 lb/hp
Weight per foot of length432.7 lb/ft
Transport snapshot
Primary published weight5,300 lb (2,404 kg)
Maximum published weight5,300 lb (2,404 kg)
Maximum US-ton equivalent2.65 US tons
Maximum published width90 in (228 cm)
Published width over 102 inNo
Weight context
Weight range5,300 lb (2,404 kg)
Primary weight basisWeight
Peer positionVery light among Row-Crop Tractor peers · 10th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 5,300 lb (2.65 US tons); published configurations reach 5,300 lb (2.65 US tons); the widest published tractor dimension is 90 in (7.5 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Farmall Super BM (5300 lb)
J.I. Case DC (5300 lb)
J.I. Case L (5307 lb)
New Holland T4050V (5307 lb)
Ford 4430 (5290 lb)
Closest comparable tractors
Farmall 350 (5365 lb)
John Deere 2010 (5054 lb)
Farmall 460 (5835 lb)
Massey Ferguson 165 (4476 lb)
Allis Chalmers UC (5815 lb, 21.14 hp)
Common questions
Farmall F-30 weight FAQ
How much does a Farmall F-30 weigh?
The Farmall F-30 weighs 5,300 lb (2,404 kg) using the primary published weight figure.
Is the Farmall F-30 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 10th percentile, lighter than roughly 90% of the row-crop tractor peers. That puts it in the very light range for this comparison. It is 8,706 lb lighter than the peer-group average of 14,006 lb.
How wide is the Farmall F-30 for transport?
The maximum published tractor width is 90 in (7.5 ft). That is 12 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Farmall F-30 weight-to-horsepower ratio?
Using the page’s representative 5,300 lb weight and 24.9 hp power figure, the tractor carries about 213.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Farmall F-30 weigh?
The representative published weight is about 2.65 US tons, while the full published range is 2.65 US tons. Loaded transport weight can be higher than the tractor specification.
