Weight summary
The published Case IH Farmall 80N weight is 5,300–6,094 lb (2,404–2,764 kg). The primary figure used for comparisons is 5,613 lb (2,546 kg), listed as 2WD Cab. The published configurations span 794 lb, a 15% difference from the lightest listed setup.
How this weight compares
Vineyard Tractor peers · 53 tractors in the benchmark.
Heavy
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Case IH |
|---|---|
| Model | Farmall 80N |
| Category | Farm tractor |
| Model years | 2017 – |
| Tractor type | Vineyard Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD Cab | — | 5,613 lb | 2,546 kg | 2.81 | — |
| 2WD ROPS | — | 5,300 lb | 2,404 kg | 2.65 | — |
| 4WD Cab | — | 6,094 lb | 2,764 kg | 3.05 | — |
| 4WD ROPS | — | 5,886 lb | 2,669 kg | 2.94 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Case IH 3220 (5617 lb)
- Case IH 485XL (5620 lb)
- Case IH Farmall 55A (5622 lb)
- Case IH Farmall 65A (5622 lb)
- Case IH Farmall 75A (5622 lb)
Closest comparable tractors
- John Deere 5075GN (5566 lb, 75 hp)
- John Deere 75F (5512 lb, 74 hp)
- Case IH Farmall 80V (5421 lb, 74 hp)
- John Deere 2855N (5630 lb, 80 hp)
- Massey Ferguson 3307 (6074 lb, 75 hp)
Case IH Farmall 80N weight FAQ
How much does a Case IH Farmall 80N weigh?
The Case IH Farmall 80N weighs 5,613 lb (2,546 kg) using the published 2WD Cab figure. Across the published configurations on this page, weight ranges from 5,300 to 6,094 lb (2,404 to 2,764 kg).
How much heavier is the 4WD Case IH Farmall 80N than the 2WD model?
Published 2WD weight is 5,300–5,613 lb (2,404–2,546 kg), while published 4WD weight is 5,886–6,094 lb (2,670–2,764 kg). On a midpoint basis, the published 4WD configurations are about 534 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Case IH Farmall 80N a heavy vineyard tractor?
Yes. The representative figure sits at about the 76th percentile, heavier than roughly 76% of the vineyard tractor peers. That puts it in the heavy range for this comparison. It is 625 lb heavier than the peer-group average of 4,988 lb.
How wide is the Case IH Farmall 80N for transport?
The maximum published tractor width is 52.9 in (4.4 ft). That is 49.1 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH Farmall 80N weight-to-horsepower ratio?
Using the page’s representative 5,613 lb weight and 74 hp power figure, the tractor carries about 75.8 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 80N weigh?
The representative published weight is about 2.81 US tons, while the full published range is 2.65–3.05 US tons. Loaded transport weight can be higher than the tractor specification.
