The Case IH Farmall 100N tractor weighs 5,772 lb (2,618 kg) using its published 2WD Cab weight. Other useful published figures are 5,498 lb (2WD ROPS) and 6,292 lb (4WD Cab). That places it around the 81st percentile among comparable vineyard tractors, heavier than about 81% of its peers.
The published Case IH Farmall 100N weight is 5,498–6,292 lb (2,493–2,854 kg). The primary figure used for comparisons is 5,772 lb (2,618 kg), listed as 2WD Cab. The published configurations span 794 lb, a 14.4% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Vineyard Tractor peers · 53 tractors in the benchmark.
Representative published weight
Heavy
5,772 lb
Low3,805 lb
This model5,772 lb
Average4,988 lb
High5,890 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight5,498–6,292 lb (2,493–2,854 kg)
Overall weight bandMidweight
Tractor typeVineyard Tractor
Primary horsepower98 hp / 73.1 kW
Max length159 in (403 cm)
Max width52.9 in (134 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall 100N
Category
Farm tractor
Model years
2017 –
Tractor type
Vineyard Tractor
Published weight variants
4
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
2WD Cab
—
5,772 lb
2,618 kg
2.89
—
2WD ROPS
—
5,498 lb
2,493 kg
2.75
—
4WD Cab
—
6,292 lb
2,854 kg
3.15
—
4WD ROPS
—
6,085 lb
2,760 kg
3.04
—
Configuration effect
How configuration changes the weight
794 lbLightest to heaviest · 14.4% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase96 in (243 cm)
Length159 in (403 cm)
Width52.9 in (134 cm)
Height91.7 in (232 cm)
Ground clearance11.2 in (28 cm)
Power & weight ratios
Primary power98 hp (73.1 kW)
Power basisEngine (gross)
Weight per horsepower58.9 lb/hp
Weight per foot of length435.6 lb/ft
Wheelbase / length60.4%
Transport snapshot
Primary published weight5,772 lb (2,618 kg)
Maximum published weight6,292 lb (2,854 kg)
Maximum US-ton equivalent3.15 US tons
Maximum published width52.9 in (134 cm)
Published width over 102 inNo
Weight context
Weight range5,498–6,292 lb (2,493–2,854 kg)
Primary weight basis2WD Cab
Peer positionHeavy among Vineyard Tractor peers · 81st percentile
Physical size classAbove-average size
For transport planning, the representative published tractor weight is about 5,772 lb (2.89 US tons); published configurations reach 6,292 lb (3.15 US tons); the widest published tractor dimension is 52.9 in (4.4 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Case IH Farmall 110N (5772 lb)
John Deere 1520 (5770 lb)
Case IH Farmall 65C (5776 lb)
Case IH Farmall 75C (5776 lb)
New Holland T4020 (5776 lb)
Closest comparable tractors
Case IH Farmall 95N (5820 lb, 95 hp)
Case IH Farmall 110N (5772 lb, 106 hp)
John Deere 5100GN (5566 lb, 100 hp)
Case IH JX1095N (5820 lb, 91 hp)
Case IH Farmall 105N (5820 lb, 106 hp)
Common questions
Case IH Farmall 100N weight FAQ
How much does a Case IH Farmall 100N weigh?
The Case IH Farmall 100N weighs 5,772 lb (2,618 kg) using the published 2WD Cab figure. Across the published configurations on this page, weight ranges from 5,498 to 6,292 lb (2,493 to 2,854 kg).
How much heavier is the 4WD Case IH Farmall 100N than the 2WD model?
Published 2WD weight is 5,498–5,772 lb (2,494–2,618 kg), while published 4WD weight is 6,085–6,292 lb (2,760–2,854 kg). On a midpoint basis, the published 4WD configurations are about 554 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Case IH Farmall 100N a heavy vineyard tractor?
Yes. The representative figure sits at about the 81st percentile, heavier than roughly 81% of the vineyard tractor peers. That puts it in the heavy range for this comparison. It is 784 lb heavier than the peer-group average of 4,988 lb.
How wide is the Case IH Farmall 100N for transport?
The maximum published tractor width is 52.9 in (4.4 ft). That is 49.1 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH Farmall 100N weight-to-horsepower ratio?
Using the page’s representative 5,772 lb weight and 98 hp power figure, the tractor carries about 58.9 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 100N weigh?
The representative published weight is about 2.89 US tons, while the full published range is 2.75–3.15 US tons. Loaded transport weight can be higher than the tractor specification.
