Ford 1310 Specifications

The Ford 1310 tractor specifications include PTO power rated at 16.5 hp (12.3 kW), an unsynchronized gear or partially synchronized, 12-forward, 4-reverse transmission, and a listed weight of 2,063 to 2,261 lbs.

Ford 1310 key specifications

PTO power 16.5 hp (12.3 kW)
Displacement 58.2 cu in (1.0 L)
Transmission unsynchronized gear or partially synchronized, 12-forward, 4-reverse
Fuel capacity 6.9 gal (26.1 L)
Weight 2,063 to 2,261 lbs
Wheelbase 63 inches (160 cm)
Rear PTO speed 540 rpm, 1.375-inch shaft

Ford 1310 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values for Ford farm and compact tractors in this specifications database.

PTO power16.5 hp
Low 11 hpAverage 78.8 hpHigh 316 hp
Displacement1 L
Low 0.7 LAverage 4.4 LHigh 14.8 L
Fuel capacity6.9 gal
Low 3.5 galAverage 40.3 galHigh 286 gal
Maximum listed weight2,261 lbs
Low 1,344 lbsAverage 8,007.5 lbsHigh 32,500 lbs
Wheelbase63 in
Low 48 inAverage 89.4 inHigh 139 in
This model Ford farm and compact tractors average

Ford 1310 capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity26.1 L
Hydraulic capacity17 L
Engine oil3.8 L
Coolant2.6 L

Ford 1310 dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length277 cm
Wheelbase160 cm
ROPS height210 cm

Engine specifications

Bore/Stroke 2.95 × 2.83 inches (75 × 72 mm)
Rated RPM 2,800
Torque 39 lb-ft (52.9 Nm)
Torque RPM 1,800
Compression 23:1
Air cleaner dry
Pre-heating glow plugs
Oil capacity 4 qt (3.8 L)
Coolant capacity 2.8 qt (2.6 L)
Starter volts 12
Net engine power 19 hp (14.2 kW)
Engine speed range 750-3,000

Transmission options

Gears 12 forward and 4 reverse
Clutch 216 mm dry disc
Oil capacity 18 qt (17.0 L)
Transmission options unsynchronized gear or partially synchronized

PTO and hitch

Rear hitch category Category I
Hitch control position control
Rear lift (at ends) 1,432 lbs (649 kg)
PTO engine speed 540 PTO rpm at 2,425 engine rpm

Hydraulics

Hydraulic capacity 4.5 gal (17.0 L)
Hydraulic type open center
Hydraulic pressure 2,133 psi (147.1 bar)
Total flow 6.3 gpm (23.8 L/min)

Mechanical specifications

Final drives spur gear
Differential lock mechanical rear

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 35
Charging volts 12
Battery volts 12
Battery AH 72

Dimensions and weight

Listed weight range 2,063 to 2,261 lbs
Length 109.3 inches (277 cm)
ROPS height 82.9 inches (210 cm)

Tires and tread

Front tire 4-12
Rear tire 8.3-24
2WD Lawn/turf front 25×8.50-12
4WD Lawn/turf front 25×8.50-14

Attachments

Backhoe type Ford 757A Backhoe
Bucket width 8, 48, or 60 inches (20, 121, or 152 cm)
Digging depth 76.5 inches (194 cm)
Reach from pivot 107 inches (271 cm)
Loading height 70 inches (177 cm)
Dipperstick force 719 lbs (326 kg)
Total width 70 inches (177 cm)
Cut height 1.5 to 3.5 inches (3 to 8 cm)
Attachment weight 580 lbs (263 kg)

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the tractor’s original operator, service or parts manual.