The Ford 876 tractor specifications include engine power rated at 280 hp (208.8 kW), a constant mesh or full power shift transmission, and a listed weight of 18,100 to 24,900 lbs.
Ford 876 key specifications
| Engine power |
280 hp (208.8 kW) |
| PTO power |
246 hp (183.4 kW) |
| Displacement |
611 cu in (10.0 L) |
| Transmission |
constant mesh or full power shift |
| Fuel capacity |
246 gal (931.1 L) |
| Weight |
18,100 to 24,900 lbs |
| Wheelbase |
130 inches (330 cm) |
Ford 876 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values for Ford farm and compact tractors in this specifications database.
Engine power280 hp
Low 13 hpAverage 96.2 hpHigh 360 hp
PTO power246 hp
Low 11 hpAverage 78.8 hpHigh 316 hp
Displacement10 L
Low 0.7 LAverage 4.4 LHigh 14.8 L
Fuel capacity246 gal
Low 3.5 galAverage 40.3 galHigh 286 gal
Maximum listed weight24,900 lbs
Low 1,344 lbsAverage 8,007.5 lbsHigh 32,500 lbs
Wheelbase130 in
Low 48 inAverage 89.4 inHigh 139 in
This model Ford farm and compact tractors average
Ford 876 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power228.3 hp
Ford 876 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity931.1 L
Ford 876 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.921 × 5.354 inches (125 × 136 mm) |
| Rated RPM |
2,100 |
| Torque |
895 lb-ft (1,213.6 Nm) |
| Torque RPM |
1,300 |
| Compression |
16:1 |
| Air cleaner |
dual dry element |
| Pre-heating |
ether injection |
| Oil capacity |
28 qt (26.5 L) |
| Coolant capacity |
56.5 qt (53.5 L) |
| Starter volts |
12 |
Transmission options
| Gear options |
12 forward and 4 reverse or 12 forward and 2 reverse |
| Clutch |
356 mm dry disc or 228 mm wet disc |
| Oil capacity |
21.5 qt (20.3 L) or 18 qt (17.0 L) |
PTO and hitch
| Drawbar (tested) |
228.33 hp (170.3 kW) |
| Rear hitch category |
Category IVN/III |
| Hitch control |
position control |
| Rear lift (at 24"/610mm) |
10,313 lbs (4,677 kg, III) |
| Rear PTO |
independent |
| Rear PTO speed |
1,000 rpm, 1.75-inch shaft |
Hydraulics
| Hydraulic capacity |
15.3 gal (57.9 L) |
| Hydraulic type |
closed center load sensing * Steering pump is open center. |
| Hydraulic pressure |
2,250 psi (155.1 bar) |
| Valves |
4 to 5 |
| Pump flow |
25.2 gpm (95.4 L/min) |
| Steering flow |
25.9 gpm (98.0 L/min) |
| Steering pressure |
2,300 psi (158.6 bar) |
Mechanical specifications
| Final drives |
outboard planetary |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
90 |
| Batteries |
4 |
| Battery CCA |
625 |
| Battery volts |
12 |
Dimensions and weight
| Listed weight range |
18,100 to 24,900 lbs |
| Length |
260 inches (660 cm) |
| Ground clearance |
16.1 inches (40 cm) |
| Shipping weight |
18,100 lbs (8,210 kg) |
| Operating weight |
24,900 lbs (11,294 kg, 20.8-38 duals) |
| Front axle type |
Bar: 4 inch diameter 101 mm or Flange |
| Rear axle bar |
4 inch diameter 101 mm |
| Maximum permitted weight |
29,500 lbs (13,381 kg) |
| Steering wheel height |
102.4 inches (260 cm) |
| Cab height |
125 inches (317 cm) |
| Exhaust height |
131 inches (332 cm) |
Tires and tread
| Front tire |
20.8-38 or 18.4-38 |
| Rear tire |
20.8-38 or 18.4-38 |
Other specifications
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the tractor’s original operator, service or parts manual.
