Ford 276 Specifications

The Ford 276 tractor specifications include engine power rated at 116 hp (86.5 kW), a hydrostatic, 3-range transmission, and a listed weight of 9,300 to 13,500 lbs.

Ford 276 key specifications

Engine power 116 hp (86.5 kW)
PTO power 100 hp (74.6 kW)
Displacement 268 cu in (4.4 L)
Transmission hydrostatic, 3-range
Fuel capacity 39 gal (147.6 L)
Weight 9,300 to 13,500 lbs
Rear PTO speed 540 or 1,000 rpm, 1.375-inch shaft

Ford 276 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values for Ford farm and compact tractors in this specifications database.

Engine power116 hp
Low 13 hpAverage 96.2 hpHigh 360 hp
PTO power100 hp
Low 11 hpAverage 78.8 hpHigh 316 hp
Displacement4.4 L
Low 0.7 LAverage 4.4 LHigh 14.8 L
Fuel capacity39 gal
Low 3.5 galAverage 40.3 galHigh 286 gal
Maximum listed weight13,500 lbs
Low 1,344 lbsAverage 8,007.5 lbsHigh 32,500 lbs
This model Ford farm and compact tractors average

Ford 276 power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power116 hp
PTO power100 hp

Ford 276 capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity147.6 L
Engine oil32.2 L
Coolant22 L

Engine specifications

Bore/Stroke 4.40 × 4.40 inches (112 × 112 mm)
Rated RPM 2,500
Pre-heating ether injection
Coolant capacity 23.25 qt (22.0 L)
Starter electric
Starter volts 12

Transmission options

Gears infinite forward and reverse (3-range)
Oil capacity 34 qt (32.2 L)
Transmission type hydrostatic

PTO and hitch

Rear hitch category Category I/II
Hitch control position control
Rear lift (at ends) 7,000 lbs (3,175 kg)
Rear lift (at 24"/610mm) 4,400 lbs (1,995 kg)
Front hitch category Category I/II
Front lift (at ends) 3,266 lbs (1,481 kg)
Front lift (at 24"/610mm) 2,000 lbs (907 kg)
Rear PTO independent
Front PTO speed 540 rpm, 1.375-inch shaft
PTO engine speed 540 PTO rpm at 2,500 engine rpm

Hydraulics

Hydraulic type closed center load sensing
Hydraulic pressure 2,800 psi (193.1 bar)
Valves 3
Front valves 2 (optional)
Pump flow 27 gpm (102.2 L/min)
Steering flow 5 gpm (18.9 L/min)
Steering pressure 2,300 psi (158.6 bar)

Mechanical specifications

Clutch wet disc
Drive 4×4 4WD

Electrical specifications

Electrical ground negative
Charging system alternator
Battery CCA 850
Battery volts 12

Dimensions and weight

Listed weight range 9,300 to 13,500 lbs
Ground clearance 24 inches (60 cm)
Shipping weight 9,300 lbs (4,218 kg)
Operating weight 13,500 lbs (6,123 kg, with loader)
Maximum drawbar load 2,500 lbs (1,134 kg)

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the tractor’s original operator, service or parts manual.