The Yanmar SA424 tractor has multiple listed tire configurations, including 24×8.50-14 at the front and 36×14.00-15 at the rear. Use the table to match the tractor’s agricultural, turf, industrial and 2WD/4WD setup.
Yanmar SA424 Tire Size Chart
Configuration
Tire size
Lawn/turf front
24×8.50-14
Lawn/turf rear
36×14.00-15
Industrial front
23×8.50-12
Industrial rear
14-17.5
Recommended tire pressure
For the Yanmar SA424; the recommended tire pressure is typically around 30 PSI for the rear tires when they are loaded with ballast. However; some users suggest running lower pressures; such as 15 PSI; depending on the load and conditions.
Before buying replacement tires
Match the complete sidewall size, rim diameter, axle position, 2WD/4WD configuration and tire type before ordering. On driven front axles, changing overall tire diameter can upset the required front-to-rear rolling ratio.
Tire Pressure
Recommended tire pressure: For the Yanmar SA424; the recommended tire pressure is typically around 30 PSI for the rear tires when they are loaded with ballast. However; some users suggest running lower pressures; such as 15 PSI; depending on the load and conditions.
Pressure warning: Confirm the correct pressure in the official operator’s manual and the tire manufacturer’s load-and-pressure chart before inflation.
Wheelbase and Ground Clearance
Wheelbase
63 inches 160 cm
Ground clearance
8.5 inches 21 cm
Specification disclaimer
These specifications are provided as a reference and may vary by production year, country, axle, wheel package and previous tire changes. Before purchasing, fitting or inflating tires, confirm the specifications using the Yanmar official U.S. website, the official operator’s manual and the markings on the tires currently fitted.
