Zetor Compax 35 Dimensions

Quick answer:

The Zetor Compax 35 dimensions found are: Length is 126 inches | 320 cm. Height is 94.5 inches | 240 cm. Wheelbase is 66.1 inches | 167 cm.

Length126 inches | 320 cm
Height94.5 inches | 240 cm
Wheelbase66.1 inches | 167 cm

Zetor Compax 35 Dimensions

Overall length 126 inches | 320 cm
Overall width 53.5 inches | 135 cm
Overall height 94.5 inches | 240 cm
Wheelbase 66.1 inches | 167 cm

Zetor Compax 35 Additional Measurements

Cab Height 92.5 inches | 234 cm

Zetor Compax 35 Dimension Comparison Charts

Length comparison

This model

126 in

Average

125 in

Low

95 in

High

160 in

Height comparison

This model

94.5 in

Average

90 in

Low

70 in

High

115 in

Wheelbase comparison

This model

66.1 in

Average

68 in

Low

55 in

High

82 in

Benchmarks use practical dimension ranges for the compact tractor category. Check the actual tractor and tire setup. Use the operator manual before planning storage or transport clearance.

Zetor Compax 35 Extra Dimension Notes

Storage and fit note Using the first listed dimension values the Zetor Compax 35 is about 126 inches | 320 cm long. It is about 94.5 inches | 240 cm tall and 53.5 inches | 135 cm wide. Allow extra room for mirrors and ROPS. Account for tire stance plus loader brackets and implements. Leave safe walking space around the tractor.

Zetor Compax 35 Dimensions FAQ

Is the Zetor Compax 35 a long tractor?

The Zetor Compax 35 is around the middle of the range at 126 in. This is close to the 125 in benchmark average. That gives a practical indication of the space needed for storage or transport before attachments are added.

Is the Zetor Compax 35 tall for a shed or garage?

The listed height is around the middle of the category at 94.5 in. This is close to the 90 in benchmark average. Attachments and tire size can change the real clearance needed. Cab equipment and ROPS position can also affect it.

Does the Zetor Compax 35 have a short or long wheelbase?

The wheelbase is around the middle of the range at 66.1 in. This is close to the 68 in benchmark average. That gives a rough indication of the tractor’s chassis length and maneuverability.

Official information note

Dimensions can vary with tire size and axle setup. Cab or ROPS equipment plus ballast and market specification can also change measurements. Check the operator manual and parts book. Also check the old spec plate and official zetor.com website before making storage or transport decisions.