The Zetor 4718 dimensions found are: Wheelbase is 78.27 inches | 198 cm.
Wheelbase78.27 inches | 198 cm
Zetor 4718 Dimensions
Wheelbase
78.27 inches | 198 cm
Rear tread
50.4 to 70.9 inches | 128 to 180 cm
Zetor 4718 Weight
Operating weight
5 071 lbs | 2300 kg
Zetor 4718 Dimension Comparison Charts
Wheelbase comparison
This model
78.3 in
Average
82 in
Low
65 in
High
105 in
Weight comparison
This model
5 071 lbs
Average
5 200 lbs
Low
2 500 lbs
High
9 000 lbs
Benchmarks use practical dimension ranges for the utility tractor category. Check the actual tractor and tire setup. Use the operator manual before planning storage or transport clearance.
Zetor 4718 Extra Dimension Notes
Storage and fit note
Use the listed Zetor 4718 dimensions as a starting point. Allow extra room for mirrors and ROPS. Account for tire stance plus loader brackets and implements. Leave safe walking space around the tractor.
Zetor 4718 Dimensions FAQ
Does the Zetor 4718 have a short or long wheelbase?
The wheelbase is around the middle of the range at 78.3 in. This is close to the 82 in benchmark average. That gives a rough indication of the tractor’s chassis length and maneuverability.
Is the Zetor 4718 heavy for its size?
The listed weight is around average for the category at 5 071 lbs. This is close to the 5 200 lbs benchmark average. Actual transport weight can rise with ballast and fuel. Loader equipment plus cab equipment and implements can add more weight.
Official information note
Dimensions can vary with tire size and axle setup. Cab or ROPS equipment plus ballast and market specification can also change measurements. Check the operator manual and parts book. Also check the old spec plate and official zetor.com website before making storage or transport decisions.
