The Case IH JX1080U specifications include engine power rated at 80 hp (59.7 kW), transmission options including synchronized shuttle, partial power shift with synchronized shuttle, partial power shift with power shuttle, or synchronized shuttle with creeper and a listed weight of 6,393 to 8,875 lbs.
Case IH JX1080U key specifications
| Engine power |
80 hp (59.7 kW) |
| PTO power |
69 hp (51.5 kW) |
| Displacement |
273.7 cu in (4.5 L) |
| Transmission |
synchronized shuttle, partial power shift with synchronized shuttle, partial power shift with power shuttle, or synchronized shuttle with creeper |
| Fuel capacity |
33.5 gal (126.8 L) |
| Weight |
6,393 to 8,875 lbs |
| Rear PTO |
independent |
Case IH JX1080U industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power80 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power69 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement4.5 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity33.5 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight8,875 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Case IH JX1080U power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power58.2 hp
Case IH JX1080U dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.094 × 5.197 inches (104 × 132 mm) |
| Rated RPM |
2,500 |
| Compression |
17.5:1 |
| Fuel system |
Bosch direct injection |
| Air cleaner |
dual paper elements |
| Pre-heating |
grid heater |
| Starter volts |
12 |
Transmission options
| Gear options |
12 forward and reverse, 24 forward and 12 reverse, 24 forward and reverse, or 20 forward and 12 reverse |
PTO and hitch
| Drawbar (tested) |
58.2 hp (43.4 kW) |
| PTO (tested) |
71.6 hp (53.4 kW) |
| Rear hitch category |
Category I/II |
| Hitch control |
mechanical lower link |
| Rear lift (at 24"/610mm) |
5,745 lbs (2,605 kg) |
| Rear PTO speed |
540 or 1,000 rpm |
| PTO engine speed |
540 PTO rpm at 2,200 engine rpm |
Hydraulics
| Hydraulic type |
open center |
| Valves |
2 to 3 |
| Pump flow |
14.5 gpm (54.9 L/min) |
| Total flow |
20 gpm (75.7 L/min) |
| Steering flow |
5.5 gpm (20.8 L/min) |
Mechanical specifications
| Clutch |
electro-hydraulic wet disc |
| Differential lock |
electro-hydraulic |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
120 |
| Battery CCA |
960 |
| Battery volts |
12 |
Dimensions and weight
| Ballasted weight |
10,650 lbs (4,830 kg) |
| ROPS height |
104.5 inches (265 cm) |
| Cab height |
102.5 inches (260 cm) |
| Exhaust height |
117.5 inches (298 cm) |
Tires and tread
| Rear tread |
64.3 to 83.9 inches (163 to 213 cm) |
Attachments
| Raise time |
5.7s raise: 4.5 s (MSL) or 3.8s raise: 2.5 s (MSL) |
| dump |
4.4s dump: 4.1 s (MSL) or 3.3s |
| Lowering time |
4.3s lower: 4.2 s (MSL) or 2.7s lower: 1.6 s (MSL) |
| Rollback time |
3.3s rollback: 3.0 s (MSL) or 2.3s |
| Attachment weight |
950 lbs (430 kg) or 750 lbs (340 kg) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.