The Case IH D25 specifications include engine power rated at 25 hp (18.6 kW), a gear transmission and a listed weight of 2,334 to 2,474 lbs.
Case IH D25 key specifications
| Engine power | 25 hp (18.6 kW) |
|---|---|
| PTO power | 21.7 hp (16.2 kW) |
| Displacement | 81.2 cu in (1.3 L) |
| Transmission | gear |
| Fuel capacity | 7.3 gal (27.6 L) |
| Weight | 2,334 to 2,474 lbs |
| Wheelbase | 63 inches (160 cm) |
Case IH D25 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power25 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power21.7 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement1.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity7.3 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight2,474 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase63 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH D25 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH D25 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke | 3.307 × 3.15 inches (84 × 80 mm) |
|---|---|
| Rated RPM | 2,600 |
| Air cleaner | dual dry element |
| Pre-heating | glow plugs |
| Starter | electric |
| Starter volts | 12 |
Transmission options
| Gears | 9 forward and 3 reverse |
|---|
PTO and hitch
| Rear hitch category | Category I |
|---|---|
| Rear lift (at 24"/610mm) | 1,635 lbs (741 kg) |
| Rear PTO speed | 540 rpm, 1.375-inch shaft |
| Mid PTO | transmission (optional) |
| Mid PTO speed | 2,000 rpm |
Hydraulics
| Hydraulic type | open center |
|---|---|
| Pump flow | 6.1 gpm (23.1 L/min) |
| Total flow | 9.6 gpm (36.3 L/min) |
| Steering flow | 3.5 gpm (13.2 L/min) |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 40 |
| Battery CCA | 420 |
| Battery volts | 12 |
Dimensions and weight
| Length | 106.6 inches (270 cm) |
|---|---|
| Width | 54.3 inches (137 cm) |
| Ground clearance | 14 inches (35 cm) |
| ROPS height | 87.7 inches (222 cm) |
Tires and tread
| Front tread | 43.4 inches (110 cm) |
|---|---|
| Rear tread | 42.8 inches (108 cm) |
| Front tire | 5.50-16 (2WD) |
| Rear tire | 11.2-24 |
| Lawn/turf front tire | 23-8.50-12 (2WD) |
| Lawn/turf rear tire | 13.6-16 |
| Industrial front tire | 25-8.50-14 (4WD) |
| Industrial rear tire | 17.5L-24 |
Attachments
| Backhoe type | CaseIH 757C Backhoe or CaseIH 758C Backhoe |
|---|---|
| Transport height | 75 inches (190 cm) or 81 inches (205 cm) |
| Reach from pivot | 119 inches (302 cm) or 132 inches (335 cm) |
| Loading height | 66 inches (167 cm) or 77 inches (195 cm) |
| Bucket Rotation | 170° or 180° |
| Swing Arc | 180° |
| Bucket force | 2,675 lbs (1,213 kg) or 3,550 lbs (1,610 kg) |
| Dipperstick force | 2,105 lbs (954 kg) or 2,225 lbs (1,009 kg) |
| Total width | 72.8 inches (184 cm) or 91.5 inches (232 cm) |
| Cut height | 1.5 to 4 inch 3 to 10 cm |
| Attachment weight | 839 lbs (380 kg) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
