The Case IH CX80 specifications include engine power rated at 84 hp (62.6 kW), transmission options including synchro shuttle, partial power shift, or creeper and a listed weight of 7,396 to 8,466 lbs.
Case IH CX80 key specifications
| Engine power | 84 hp (62.6 kW) |
|---|---|
| PTO power | 67 hp (50.0 kW) |
| Displacement | 243.5 cu in (4.0 L) |
| Transmission | synchro shuttle, partial power shift, or creeper |
| Fuel capacity | 42 gal (159.0 L) |
| Weight | 7,396 to 8,466 lbs |
| Wheelbase | 89.1 inches (226 cm, 2WD) |
Case IH CX80 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power84 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power67 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement4 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity42 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight8,466 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase89.1 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH CX80 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH CX80 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Power and performance
| Original price | $30,000 in 1999 |
|---|
Engine specifications
| Bore/Stroke | 3.93 × 5.00 inches (100 × 127 mm) |
|---|---|
| Rated RPM | 2,200 |
| Torque | 253 lb-ft (343.1 Nm) |
| Torque RPM | 1,400 |
| Compression | 17.25:1 |
| Fuel system | mechanical direct injection with 5-hole injectors |
| Air cleaner | dual paper elements |
| Oil capacity | 9.3 qt (8.8 L) |
| Coolant capacity | 16.9 qt (16.0 L) |
| Starter volts | 12 |
| Net engine power | 78 hp (58.2 kW) |
| Oil change | 250 h |
Transmission options
| Gear options | 8 forward and reverse, 16 forward and 8 reverse, or 24 forward and 12 reverse |
|---|---|
| Oil capacity | 36.4 qt (34.4 L, 2WD) |
PTO and hitch
| Drawbar (tested) | 59.3 hp (44.2 kW) |
|---|---|
| PTO (tested) | 71.3 hp (53.2 kW) |
| Rear hitch category | Category I/II |
| Hitch control | electronic upper link |
| Rear lift | 3,665 lbs (1,662 kg) |
| Rear PTO | independent |
| Rear PTO speed | 540 rpm |
Hydraulics
| Hydraulic capacity | 9.1 gal (34.4 L, 2WD) |
|---|---|
| Hydraulic type | open center |
| Hydraulic pressure | 2,500 psi (172.4 bar) |
| Valves | 0 to 3 |
| Pump flow | 15.7 gpm (59.4 L/min) |
| Total flow | 24.2 gpm (91.6 L/min, total) |
Mechanical specifications
| Clutch | hydraulic wet disc |
|---|---|
| Drive | 4×2 2WD |
| Differential lock | electro-hydraulic |
| Steering | hydrostatic power |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 65 |
| Battery CCA | 650 |
| Battery volts | 12 |
Dimensions and weight
| Shipping weight | 7,396 lbs (3,354 kg, 2WD) |
|---|---|
| Operating weight | 8,135 lbs (3,690 kg) |
| Maximum permitted weight | 10,150 lbs (4,604 kg) |
Tires and tread
| Front tire | 7.50-16 |
|---|---|
| Rear tire | 16.9-30 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
