The Case IH C60 specifications include engine power rated at 64 hp (47.7 kW), transmission options including 8 forward and 4 reverse, 16 forward and 8 reverse, or 8 forward and reverse and a listed weight of 5,357 to 7,605 lbs.
Case IH C60 key specifications
| Engine power |
64 hp (47.7 kW) |
| PTO power |
50 hp (37.3 kW) |
| Displacement |
165 cu in (2.7 L) |
| Transmission |
8 forward and 4 reverse, 16 forward and 8 reverse, or 8 forward and reverse |
| Fuel capacity |
20 gal (75.7 L) |
| Weight |
5,357 to 7,605 lbs |
| Wheelbase |
80.9 inches (205 cm, 2WD) |
Case IH C60 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power64 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power50 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.7 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity20 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight7,605 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase80.9 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH C60 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power48.4 hp
Case IH C60 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity75.7 L
Power and performance
| Original price |
$22,400 in 1999 |
Engine specifications
| Bore/Stroke |
3.74 × 5.00 inches (95 × 127 mm) |
| Rated RPM |
2,250 |
| Torque |
180 lb-ft (244.1 Nm) |
| Torque RPM |
1,400 |
| Compression |
17.25:1 |
| Fuel system |
mechanical direct injection with 5-hole injectors |
| Air cleaner |
dual paper elements |
| Oil capacity |
8 qt (7.6 L) |
| Coolant capacity |
12.57 qt (11.9 L) |
| Starter volts |
12 |
| Net engine power |
60 hp (44.7 kW) |
| Oil change |
250 h |
Transmission options
| Oil capacity |
36 qt (34.1 L, 2WD) |
| Transmission options |
partial power shift or creeper |
PTO and hitch
| Drawbar (tested) |
48.4 hp (36.1 kW) |
| PTO (tested) |
56.5 hp (42.1 kW) |
| Rear hitch category |
Category I/II |
| Hitch control |
mechanical |
| Rear lift |
3,665 lbs (1,662 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
540 rpm |
Hydraulics
| Hydraulic capacity |
9 gal (34.1 L, 2WD) |
| Hydraulic type |
open center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
0 to 3 |
| Pump flow |
12.7 gpm (48.1 L/min) |
| Total flow |
15.7 gpm (59.4 L/min) |
Mechanical specifications
| Clutch |
hydraulic wet disc |
| Drive |
4×2 2WD |
| Differential lock |
mechanical |
| Steering |
hydrostatic power |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
65 |
| Battery CCA |
650 |
| Battery volts |
12 |
Dimensions and weight
| Shipping weight |
5,357 lbs (2,429 kg, 2WD) |
| Operating weight |
7,605 lbs (3,449 kg) |
| Maximum permitted weight |
10,150 lbs (4,604 kg) |
Tires and tread
| Front tire |
7.50-16 |
| Rear tire |
14.9-28 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
