The Case IH C50 specifications include engine power rated at 53 hp (39.5 kW), transmission options including 8 forward and 4 reverse, 16 forward and 8 reverse, or 8 forward and reverse and a listed weight of 5,357 to 7,595 lbs.
Case IH C50 key specifications
Engine power
53 hp (39.5 kW)
PTO power
40 hp (29.8 kW)
Displacement
165 cu in (2.7 L)
Transmission
8 forward and 4 reverse, 16 forward and 8 reverse, or 8 forward and reverse
Fuel capacity
20 gal (75.7 L)
Weight
5,357 to 7,595 lbs
Rear PTO
independent
Case IH C50 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power53 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power40 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.7 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity20 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight7,595 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Case IH C50 power chart
Compare the available engine, PTO and drawbar power ratings.
Engine power53 hp
PTO power40 hp
Tested PTO power42.5 hp
Tested drawbar power35.4 hp
Case IH C50 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity75.7 L
Engine oil7.6 L
Coolant11.9 L
Engine specifications
Bore/Stroke
3.74 × 5.00 inches (95 × 127 mm)
Rated RPM
2,250
Torque
140 lb-ft (189.8 Nm)
Torque RPM
1,200
Compression
17.25:1
Fuel system
mechanical direct injection with 5-hole injectors
Air cleaner
dual paper elements
Oil capacity
8 qt (7.6 L)
Coolant capacity
12.57 qt (11.9 L)
Starter volts
12
Net engine power
48 hp (35.8 kW)
Oil change
250 h
Transmission options
Transmission options
partial power shift or creeper
PTO and hitch
Drawbar (tested)
35.4 hp (26.4 kW)
PTO (tested)
42.5 hp (31.7 kW)
Rear hitch category
Category I/II
Hitch control
mechanical draft sensing
Rear lift
3,665 lbs (1,662 kg)
Rear PTO speed
540 rpm
Hydraulics
Hydraulic type
open center
Hydraulic pressure
2,500 psi (172.4 bar)
Valves
0 to 3
Pump flow
12.7 gpm (48.1 L/min)
Total flow
15.7 gpm (59.4 L/min)
Mechanical specifications
Clutch
hydraulic wet disc
Differential lock
mechanical rear
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
65
Battery CCA
650
Battery volts
12
Dimensions and weight
Operating weight
7,595 lbs (3,445 kg)
Maximum permitted weight
10,150 lbs (4,604 kg)
Tires and tread
Front tire
7.50-16
Rear tire
14.9-28
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
