The Case IH 9350 specifications include engine power rated at 310 hp (231.2 kW), transmission options including full power shift, synchronized, or two-speed power shift and a listed weight of 28,720 to 29,600 lbs.
Case IH 9350 key specifications
| Engine power |
310 hp (231.2 kW) |
| PTO power |
266 hp (198.4 kW) |
| Displacement |
660.3 cu in (10.8 L) |
| Transmission |
full power shift, synchronized, or two-speed power shift |
| Fuel capacity |
200 gal (757.0 L) |
| Weight |
28,720 to 29,600 lbs |
| Wheelbase |
137 inches (347 cm, row-crop) |
Case IH 9350 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power310 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power266 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement10.8 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity200 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight29,600 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase137 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9350 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power246.2 hp
Case IH 9350 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity757 L
Case IH 9350 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.921 × 5.787 inches (125 × 147 mm) |
| Rated RPM |
2,100 |
| Compression |
16.1:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
38.8 qt (36.7 L) |
| Coolant capacity |
66 qt (62.5 L) |
| Starter volts |
12 |
| Engine speed range |
850-2,300 |
| Oil change |
250 h |
Transmission options
| Gear options |
12 forward and 3 reverse or 24 forward and 6 reverse |
| Clutch |
hydraulic wet disc or wet disc |
PTO and hitch
| Drawbar (tested) |
246.21 hp (183.6 kW) |
| PTO (tested) |
284.25 hp (212.0 kW) |
| Rear hitch category |
Category III |
| Rear lift (at 24"/610mm) |
14,000 lbs (6,350 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,900 psi (200.0 bar) |
| Valves |
4 |
| Pump flow |
27 gpm (102.2 L/min, Power shift) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
125 |
| Batteries |
3 |
| Battery CCA |
625 |
| Battery volts |
12 |
Dimensions and weight
| Length |
264 inches (670 cm) |
| Width |
94 inches (238 cm, width at fenders) |
| Shipping weight |
29,600 lbs (13,426 kg, with row-crop axle and 20.8×38 single wheels) |
| Operating weight |
28,720 lbs (13,027 kg) |
| Exhaust height |
143 inches (363 cm) |
| Front axle clearance |
32 inches (81 cm) |
| Drawbar clearance |
20.1 inches (51 cm) |
| Front axle type |
4 × 119.5 inches (101 × 3,035 mm) |
| Rear axle bar |
4 × 119.5 inches (101 × 3,035 mm) |
| Maximum permitted weight |
34,000 lbs (15,422 kg) |
Tires and tread
| Front tire |
20.8R38 |
| Rear tire |
20.8R38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
