Case IH 9330 Specifications

The Case IH 9330 specifications include engine power rated at 240 hp (179.0 kW), a full powershift transmission and a listed weight of 21,026 to 23,650 lbs.

Case IH 9330 key specifications

Engine power 240 hp (179.0 kW)
PTO power 207 hp (154.4 kW)
Displacement 504.5 cu in (8.3 L)
Transmission full powershift
Fuel capacity 115 gal (435.3 L)
Weight 21,026 to 23,650 lbs
Wheelbase 120 inches (304 cm, row-crop)

Case IH 9330 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power240 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power207 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity115 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight23,650 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase120 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH 9330 power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power240 hp
PTO power207 hp
Tested PTO power230 hp
Tested drawbar power185.9 hp

Case IH 9330 capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity435.3 L
Engine oil21 L
Coolant27.9 L

Case IH 9330 dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length614 cm
Wheelbase304 cm
Width225 cm

Engine specifications

Bore/Stroke 4.49 × 5.31 inches (114 × 135 mm)
Rated RPM 2,200
Compression 16.5:1
Air cleaner dual paper elements
Oil capacity 22.2 qt (21.0 L)
Coolant capacity 29.5 qt (27.9 L)
Starter volts 12
Engine speed range 850-2,310
Oil change 250 h

Transmission options

Gears 12 forward and 3 reverse
Clutch hydraulic wet disc

PTO and hitch

Drawbar (tested) 185.88 hp (138.6 kW)
PTO (tested) 229.96 hp (171.5 kW)
Rear hitch category Category III
Rear lift (at 24"/610mm) 12,750 lbs (5,783 kg)
Rear PTO independent
Rear PTO speed 1,000 rpm

Hydraulics

Hydraulic type closed center
Hydraulic pressure 2,900 psi (200.0 bar)
Valves 4
Pump flow 28 gpm (106.0 L/min)

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 125
Batteries 2
Battery CCA 625
Battery volts 12

Dimensions and weight

Length 242 inches (614 cm)
Width 88.9 inches (225 cm, width at fenders)
Shipping weight 21,026 lbs (9,537 kg, with 18.4×38 single wheels)
Operating weight 23,650 lbs (10,727 kg)
Exhaust height 130.4 inches (331 cm)
Front axle clearance 32.4 inches (82 cm)
Drawbar clearance 19 inches (48 cm)
Front axle type 4 × 119.5 inches (101 × 3,035 mm)
Rear axle bar 4 × 119.5 inches (101 × 3,035 mm)
Maximum permitted weight 26,000 lbs (11,793 kg)

Tires and tread

Front tire 18.4R38
Rear tire 18.4R38

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.