The Case IH 9270 specifications include engine power rated at 335 hp (249.8 kW), transmission options including full power shift or fully synchronized and a listed weight of 34,045 lbs (15,442 kg).
Case IH 9270 key specifications
| Engine power |
335 hp (249.8 kW) |
| PTO power |
308 hp (229.7 kW) |
| Displacement |
855 cu in (14.0 L) |
| Transmission |
full power shift or fully synchronized |
| Fuel capacity |
250 gal (946.2 L) |
| Weight |
34,045 lbs (15,442 kg) |
| Wheelbase |
141.5 inches (359 cm) |
Case IH 9270 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power335 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power308 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement14 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity250 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight34,045 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase141.5 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9270 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power264.8 hp
Case IH 9270 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity946.2 L
Case IH 9270 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
5.50 × 6.00 inches (140 × 152 mm) |
| Rated RPM |
2,100 |
| Torque |
1,131 lb-ft (1,533.6 Nm) |
| Torque RPM |
1,400 |
| Compression |
14.5:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
44 qt (41.6 L) |
| Coolant capacity |
66 qt (62.5 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 3 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
264.77 hp (197.4 kW) |
| PTO (tested) |
317.50 hp (236.8 kW) |
| Rear hitch category |
Category III (optional) |
| Rear lift |
14,000 lbs (6,350 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
| PTO engine speed |
1,000 PTO rpm at 2,098 engine rpm |
Hydraulics
| Hydraulic capacity |
26 gal (98.4 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
4 |
| Powershift Total flow |
27 gpm (102.2 L/min) |
| SyncroShift Total flow |
30 gpm (113.6 L/min) |
Mechanical specifications
| Steering |
hydrostatic power |
Electrical specifications
| Electrical ground |
negative |
| Battery volts |
12 |
Dimensions and weight
| Length |
279.5 inches (709 cm) |
| Width |
96 inches (243 cm, minimum) |
| Operating weight |
34,045 lbs (15,442 kg, 20.8R42 duals) |
| Exhaust height |
149.6 inches (379 cm) |
Tires and tread
| Front tire |
24.5-32 |
| Rear tire |
24.5-32 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
