The Case IH 9110 specifications include engine power rated at 190 hp (141.7 kW), a full power shift transmission and a listed weight of 17,000 lbs (7,711 kg).
Case IH 9110 key specifications
| Engine power |
190 hp (141.7 kW) |
| PTO power |
168 hp (125.3 kW) |
| Displacement |
505 cu in (8.3 L) |
| Transmission |
full power shift |
| Fuel capacity |
115 gal (435.3 L) |
| Weight |
17,000 lbs (7,711 kg) |
| Wheelbase |
120.4 inches (305 cm) |
Case IH 9110 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power190 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power168 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity115 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight17,000 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase120.4 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9110 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 9110 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity435.3 L
Case IH 9110 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.49 × 5.32 inches (114 × 135 mm) |
| Rated RPM |
2,100 |
| Torque |
618 lb-ft (838.0 Nm) |
| Torque RPM |
1,500 |
| Oil capacity |
22 qt (20.8 L) |
| Coolant capacity |
35.2 qt (33.3 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 2 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Rear hitch category |
Category III (optional) |
| Rear lift |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic capacity |
18 gal (68.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
2 to 4 |
| Total flow |
27 gpm (102.2 L/min) |
Mechanical specifications
| Final drives |
inboard planetary |
| Steering |
hydrostatic power for steerable front axle and articulated chassis |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
105 |
| Batteries |
2 |
| Battery volts |
12 |
Dimensions and weight
| Length |
241.6 inches (613 cm) |
| Width |
119.5 inches (303 cm, minimum) |
| Ground clearance |
20.5 inches (52 cm) |
| Exhaust height |
129.6 inches (329 cm) |
| Maximum permitted weight |
24,000 lbs (10,886 kg) |
| Front axle type |
4 × 119.5 inches (101 × 3,035 mm) |
| Rear axle bar |
4 × 119.5 inches (101 × 3,035 mm) |
Tires and tread
| Front tread |
60 to 130 inches (152 to 330 cm) |
| Rear tread |
60 to 130 inches (152 to 330 cm) |
| Front tire |
18.4-38 |
| Rear tire |
18.4-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
