The Case IH 8950 specifications include PTO power rated at 225 hp (167.8 kW), transmission options including full power shift or creeper and a listed weight of 17,445 to 18,340 lbs.
Case IH 8950 key specifications
| PTO power | 225 hp (167.8 kW) |
|---|---|
| Displacement | 504.5 cu in (8.3 L) |
| Transmission | full power shift or creeper |
| Fuel capacity | 117 gal (442.8 L) |
| Weight | 17,445 to 18,340 lbs |
| Wheelbase | 118.3 inches (300 cm) |
| Rear PTO | independent |
Case IH 8950 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power225 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity117 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight18,340 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118.3 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 8950 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 8950 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Engine specifications
| Bore/Stroke | 4.488 × 5.315 inches (114 × 135 mm) |
|---|---|
| Rated RPM | 2,200 |
| Compression | 16.5:1 |
| Fuel system | mechanical injection |
| Air cleaner | dual dry element |
| Oil capacity | 22 qt (20.8 L) |
| Coolant capacity | 31 qt (29.3 L) |
| Starter | electric |
| Starter volts | 12 |
Transmission options
| Gear options | 18 forward and 4 reverse or 24 forward and 6 reverse |
|---|
PTO and hitch
| Drawbar (tested) | 195.89 hp (146.1 kW) |
|---|---|
| PTO (tested) | 255.18 hp (190.3 kW) |
| Rear hitch category | Category III/IIIN |
| Hitch control | electronic lower-link draft sensing |
| Rear lift | 16,000 lbs (7,257 kg) |
| Rear PTO speed | 1,000 rpm, 1.75-inch shaft |
Hydraulics
| Hydraulic capacity | 45.5 gal (172.2 L) |
|---|---|
| Hydraulic type | closed center pressure-flow compensated |
| Hydraulic pressure | 2,200 psi (151.7 bar) |
| Valves | 3 or 4 |
| Pump flow | 29 gpm (109.8 L/min) |
| SCV flow | 27 gpm (102.2 L/min) |
Mechanical specifications
| Clutch | electro-hydraulic wet disc |
|---|---|
| Differential lock | electric rear |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 110 |
| Charging volts | 12 |
| Batteries | 2 |
| Battery CCA | 950 |
| Battery volts | 12 |
Dimensions and weight
| Shipping weight | 17,445 lbs (7,913 kg) |
|---|---|
| Operating weight | 18,340 lbs (8,319 kg) |
| Front axle clearance | 19.5 inches (49 cm) |
| Rear axle | 4 × 120 inches (101 × 3,048 mm) |
Tires and tread
| Front tread | 60 to 88 inches (152 to 223 cm) |
|---|---|
| Front tire | 16.9R30 |
| Rear tire | 18.4R46 |
Attachments
| Raise time | 9 seconds |
|---|---|
| Lowering time | 6 seconds |
| Rollback time | 3.5 seconds |
| Attachment weight | 3,765 lbs (1,707 kg) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
