The Case IH 9110 dimensions found are: length is 241.6 inches | 613 cm, minimum width is 119.5 inches | 303 cm, height is 129.6 inches | 329 cm, and wheelbase is 120.4 inches | 305 cm.
Length241.6 inches | 613 cm
Width119.5 inches | 303 cm
Height129.6 inches | 329 cm
Wheelbase120.4 inches | 305 cm
Case IH 9110 Dimensions
Overall length
241.6 inches | 613 cm
Overall width
Minimum width: 119.5 inches | 303 cm
Overall height
Exhaust: 129.6 inches | 329 cm
Wheelbase
120.4 inches | 305 cm
Ground clearance
Frame: 20.5 inches | 52 cm
Front tread
60 to 130 inches | 152 to 330 cm
Rear tread
60 to 130 inches | 152 to 330 cm
Case IH 9110 Weight
Weight
24000 lbs | 10886 kg
Shipping weight
17000 lbs | 7711 kg
Case IH 9110 Tire Size Notes
Ag front
18.4-38
Ag rear
18.4-38
Case IH 9110 Dimension Comparison Charts
Length comparison
This model
241.6 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
119.5 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
129.6 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
120.4 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
20.5 in
Average
18 in
Low
12 in
High
26 in
Weight comparison
This model
24,000 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Floor space footprint
This model
200 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 9110 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 9110 is about 241.6 inches | 613 cm long, about 119.5 inches | 303 cm wide, and about 129.6 inches | 329 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 9110 Dimensions FAQ
Is the Case IH 9110 a long tractor?
The Case IH 9110 is a longer tractor at 241.6 in, which is above the 190 in benchmark average. Plan more shed, trailer and turning-space allowance than an average tractor in this range.
Is the Case IH 9110 narrow enough for tight storage?
No, based on width alone it is on the wide side at 119.5 in, which is above the 96 in benchmark average. Use the exact tire stance before judging gate, trailer or garage fit.
Is the Case IH 9110 tall for a shed or garage?
The listed height is about normal at 129.6 in, which is close to the 125 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH 9110 need?
The bare footprint is about 200 sq ft from a 20.1 ft length and 10 ft width. That is above the 130 sq ft benchmark, so it needs more floor space than average.
Does the Case IH 9110 have a short or long wheelbase?
The wheelbase is average for the category at 120.4 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 9110 have good ground clearance?
The listed ground clearance is high for the category at 20.5 in, which is above the 18 in benchmark average. It has more underside clearance than the benchmark average.
Is the Case IH 9110 heavy for its size?
The listed weight is heavy for the category at 24,000 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
