The Case IH 2294 specifications include engine power rated at 154 hp (114.8 kW), a three-speed power shift transmission and a listed weight of 11,070 to 14,390 lbs.
Case IH 2294 key specifications
| Engine power | 154 hp (114.8 kW) |
|---|---|
| PTO power | 130 hp (96.9 kW) |
| Displacement | 504 cu in (8.3 L) |
| Transmission | three-speed power shift |
| Fuel capacity | 65 gal (246.0 L) |
| Weight | 11,070 to 14,390 lbs |
| Wheelbase | 104 inches (264 cm) |
Case IH 2294 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power154 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power130 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity65 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight14,390 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase104 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 2294 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 2294 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Engine specifications
| Bore/Stroke | 4.625 × 5.00 inches (117 × 127 mm) |
|---|---|
| Rated RPM | 2,100 |
| Compression | 15.8:1 |
| Oil capacity | 24 qt (22.7 L) |
| Coolant capacity | 38 qt (36.0 L) |
| Starter volts | 12 |
Transmission options
| Gears | 12 forward and 3 reverse |
|---|---|
| Oil capacity | 100 qt (94.6 L) |
PTO and hitch
| Drawbar (claimed) | 116 hp (86.5 kW) |
|---|---|
| Drawbar (tested) | 115.35 hp (86.0 kW) |
| PTO (tested) | 131.97 hp (98.4 kW) |
| Rear hitch category | Category II |
| Rear lift (at 24"/610mm) | 6,600 lbs (2,993 kg) |
| Rear PTO | independent |
| Rear PTO speed | 540 or 1,000 rpm |
Hydraulics
| Hydraulic capacity | 25 gal (94.6 L) |
|---|---|
| Hydraulic type | closed center |
| Hydraulic pressure | 2,250 psi (155.1 bar) |
| Valves | 2 to 4 * 3 only with 4WD |
| Pump flow | 23 gpm (87.1 L/min) |
| Steering flow | 8 gpm (30.3 L/min) |
| Steering pressure | 2,000 psi (137.9 bar) |
Mechanical specifications
| Clutch | hydraulic |
|---|
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 72 |
| Battery volts | 12 |
Dimensions and weight
| Shipping weight | 11,070 lbs (5,021 kg) |
|---|---|
| Operating weight | 14,390 lbs (6,527 kg) |
| Rear axle bar | 3.5 × 96 inches (88 × 2,438 mm) or 3.5 × 120 inches (88 × 3,048 mm) |
| Maximum permitted weight | 16,600 lbs (7,529 kg) |
Tires and tread
| Rear tread | 60 to 88 inches (152 to 223 cm) or 60 to 112 inches (152 to 284 cm) |
|---|---|
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4-38 (2WD) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
