The Case IH 2096 specifications include PTO power rated at 116 hp (86.5 kW), a three-speed power shift transmission and a listed weight of 11,875 to 14,180 lbs.
Case IH 2096 key specifications
| PTO power |
116 hp (86.5 kW) |
| Displacement |
359 cu in (5.9 L) |
| Transmission |
three-speed power shift |
| Fuel capacity |
65 gal (246.0 L) |
| Weight |
11,875 to 14,180 lbs |
| Wheelbase |
108 inches (274 cm) |
| Rear PTO |
independent |
Case IH 2096 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power116 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement5.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity65 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight14,180 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase108 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 2096 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power100.6 hp
Case IH 2096 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity246 L
Case IH 2096 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.016 × 4.724 inches (102 × 120 mm) |
| Rated RPM |
2,100 |
| Compression |
16.5:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
16 qt (15.1 L) |
| Coolant capacity |
22 qt (20.8 L) |
| Starter volts |
12 |
| Engine speed range |
800-2,250 |
Transmission options
| Gears |
12 forward and 3 reverse |
| Oil capacity |
100 qt (94.6 L) |
PTO and hitch
| Drawbar (claimed) |
101 hp (75.3 kW) |
| Drawbar (tested) |
100.56 hp (75.0 kW) |
| PTO (tested) |
115.67 hp (86.3 kW) |
| Rear hitch category |
Category II |
| Rear lift (at 24"/610mm) |
8,250 lbs (3,742 kg) |
| Rear PTO speed |
540 or 1,000 rpm, 1.375-inch shaft |
Hydraulics
| Hydraulic capacity |
25 gal (94.6 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,250 psi (155.1 bar) |
| Valves |
2 |
| Pump flow |
23 gpm (87.1 L/min) |
| Steering flow |
8 gpm (30.3 L/min) |
Mechanical specifications
| Differential lock |
electric rear |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
105 |
| Battery volts |
12 |
Dimensions and weight
| Length |
171 inches (434 cm) |
| Ground clearance |
16 inches (40 cm) |
| Shipping weight |
11,875 lbs (5,386 kg, 2WD) |
| Operating weight |
14,180 lbs (6,432 kg, duals) |
| Rear axle bar |
3.50 × 96 inches (88 × 2,438 mm) or 3.50 × 120 inches (88 × 3,048 mm) |
| ROPS height |
115.4 inches (293 cm) |
| Folded ROPS height |
91.4 inches (232 cm) |
| Cab height |
118 inches (299 cm) |
| Exhaust height |
116 inches (294 cm) |
Tires and tread
| Rear tread |
60 to 110 inches (152 to 279 cm) or 60 to 132 inches (152 to 335 cm) |
| 2WD Standard tires (ag) |
Front: 11.00-16. Rear: 18.4-38 |
| 4WD Standard tires (ag) |
Front: 16.9-26. Rear: 18.4-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
