The Case IH 2096 tractor PTO horsepower is 116 hp | 86.5 kW, and the drawbar horsepower is 101 hp | 75.3 kW.
PTO HP116 hp | 86.5 kW
Drawbar HP101 hp | 75.3 kW
Displacement359 ci | 5.9 L
Case IH 2096 Horsepower Specs
PTO horsepower claimed
116 hp | 86.5 kW
PTO horsepower tested
115.67 hp | 86.3 kW
Drawbar horsepower claimed
101 hp | 75.3 kW
Drawbar horsepower tested
100.56 hp | 75.0 kW
Case IH 2096 Useful Horsepower Calculations
Drawbar-to-PTO power ratio
87.1% drawbar hp vs PTO hp
Engine size per PTO horsepower
3.1 ci per PTO hp
PTO horsepower per liter
19.7 PTO hp per L
Fuel tank per PTO horsepower
0.6 gal per PTO hp
Rated speed per PTO horsepower
18.1 rpm per PTO hp
Case IH 2096 Engine Specs
Engine type
turbocharged diesel
Displacement
359 ci | 5.9 L
Bore and stroke
4.016×4.724 inches | 102 x 120 mm
Compression
16.5:1
Rated RPM
2100
Case IH 2096 Fuel, Cooling, Starting & Service Specs
Fuel capacity
65 gal | 246.0 L
Starter volts
12
Battery volts
12
Idle RPM
800-2250
Case IH 2096 Horsepower Comparison Charts
PTO horsepower comparison
This model
116 hp
Average
65 hp
Low
35 hp
High
105 hp
Drawbar horsepower comparison
This model
101 hp
Average
55 hp
Low
30 hp
High
95 hp
Displacement comparison
This model
359 ci
Average
260 ci
Low
150 ci
High
380 ci
Rated RPM comparison
This model
2,100 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
3.1 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH 2096 Horsepower FAQ
How much PTO horsepower does the Case IH 2096 have?
The listed PTO output is 116 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 116 hp.
How much drawbar horsepower does the Case IH 2096 have?
The listed drawbar output is 101 hp, above the 55 hp benchmark average. That makes the 101 hp drawbar number more useful than engine hp for tillage and heavy pulling.
Is the Case IH 2096 better judged by PTO hp or drawbar hp?
The drawbar output is about 87.1% of PTO output, comparing 101 drawbar hp with 116 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH 2096 engine?
The engine displacement is 359 ci, above the 260 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Case IH 2096 engine stressed for its PTO horsepower?
The engine has about 3.1 cubic inches per PTO hp, using 359 ci and 116 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Case IH 2096 make?
The output density is about 19.7 PTO hp per liter, using 116 PTO hp and 5.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Case IH 2096 rated at?
The rated speed is 2,100 rpm, close to the 2,200 rpm benchmark average. The 2,100 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
