The Case IH 2096 tractor hydraulic capacity is 25 gal | 94.6 L, pump flow is 23 gpm | 87.1 lpm, and hydraulic pressure is 2250 psi | 155.1 bar.
Case IH 2096 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center |
|---|---|
| Hydraulic capacity | 25 gal | 94.6 L |
| Hydraulic pressure | 2250 psi | 155.1 bar |
| Pump flow | 23 gpm | 87.1 lpm |
| Steering flow | 8 gpm | 30.3 lpm |
| Hydraulic valves | 2 |
Case IH 2096 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear lift at 24 inches | 8,250 lbs | 3742 kg |
Case IH 2096 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 0.9 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 1.1 minutes at rated pump flow |
| Steering flow vs pump flow | 34.8% of listed pump flow |
| Rear lift per pump gpm | 358.7 lb per gpm |
| Rear lift per hydraulic gallon | 330 lb per gal |
| Estimated hydraulic horsepower | about 30.2 hydraulic hp from listed pressure and pump flow |
| Pump flow per listed valve | 11.5 gpm per valve |
| Metric capacity vs pump flow | 94.6 L capacity with 23 gpm pump flow |
Case IH 2096 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH 2096 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | hydraulic wet disc |
| Differential lock | electric rear |
Case IH 2096 Hydraulic Capacity FAQ
Is the Case IH 2096 hydraulic capacity big or small for its size?
The Case IH 2096 lists 25 gal | 94.6 L of hydraulic capacity, above the 18 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the Case IH 2096 hydraulics feel fast or slow?
The useful speed clue is 23 gpm | 87.1 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH 2096 hydraulic pressure tell you?
The pressure spec is 2250 psi | 155.1 bar, below the 2,600 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Case IH 2096?
On the Case IH 2096, 23 gpm | 87.1 lpm pump flow points to quicker loader and cylinder movement, 2,250 psi pressure affects force more than speed, and 8,250 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH 2096?
For implement matching, the useful checks are 23 gpm flow, 2,250 psi pressure, 8,250 lb listed lift, and 2 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, not a brute-force hydraulic setup compared with higher-pressure systems, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH 2096 rear lift capacity strong?
The listed lift figure is 8,250 lbs | 3742 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH 2096 hydraulic remotes enough?
The Case IH 2096 lists 2 for valves/remotes. That is about normal for this category.
Will the Case IH 2096 hydraulics handle long hydraulic jobs?
The useful heat clues are 25 gal of hydraulic capacity, 23 gpm flow, 2,250 psi pressure, and about 30.2 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Case IH 2096 make on paper?
Using 2,250 psi and 23 gpm, the rough pressure-flow estimate is about 30.2 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH 2096 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 8,250 lbs | 3742 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
